Workpiece Glue Coating Drying Tunnel Furnace

The Workpiece Glue Coating Drying Tunnel Furnace is a continuous thermal processing equipment specially designed for industrial adhesive coating processes. It is mainly used for rapid heating, curing, and drying of workpieces after surface glue coating, dispensing, and potting processes.The equipment adopts a continuous conveyor structure, enabling stable and efficient heat treatment during production line operation. It is widely used in industries requiring precise adhesive curing, such as automotive components, electronics, mechanical parts, and new energy products.

Product Applications

1. Automotive Components

Curing of adhesive coatings on automotive parts such as headlights, filters, sealing strips, and other components.

2. Electronic and Electrical Products

Drying and curing of circuit board potting, chip dispensing, sensor packaging, and other electronic assembly processes.

3. Hardware and Mechanical Parts

Surface drying and adhesive curing of hardware products and mechanical components after glue application.

4. Lithium Battery and New Energy Components

Heating and crystallization of adhesives used in lithium batteries and new energy components.

Product Parameters

Product Features

1. Continuous and Efficient Operation

The equipment adopts a production line operation mode. Material loading, heating, curing, and unloading are completed automatically, significantly improving production efficiency.

2. Precise Temperature Control

Equipped with a multi-zone independent temperature control system, ensuring uniform temperature distribution inside the furnace and preventing adhesive foaming caused by uneven heating.

3. Energy Saving and Environmental Protection

The furnace uses a high-density insulation layer to reduce heat loss and is equipped with an exhaust interface for removing volatile gases generated during the curing process.

4. Intelligent Control System

PLC control combined with a touchscreen interface enables real-time monitoring and recording of temperature curves for precise process management.

FAQ 

Q1: What types of adhesives can this tunnel furnace cure?

A: The equipment is suitable for various adhesives, including UV thermal curing adhesives, epoxy resin adhesives, silicone adhesives, polyurethane (PU) adhesives, and various hot melt adhesives.

Q2: How does the equipment ensure consistent drying results for workpieces of different sizes?

A: By adjusting the conveyor speed and independently controlling the temperature of each heating zone, the equipment ensures that different workpieces receive standardized and consistent heat input during the curing process.

Q3: What are the requirements for the working environment?

A: The equipment should be installed and operated in a well-ventilated indoor environment. It must be connected to the factory exhaust ventilation system to discharge volatile substances generated during adhesive curing.

Q4: What heating methods are available for the tunnel furnace?

A: The equipment can be configured with different heating methods, including infrared radiation heating, hot air circulation heating, or a combination of both heating technologies according to process requirements.

Q5: Does the equipment support customized designs?

A: Yes. The equipment supports non-standard customization. The furnace length, width, heating zones, and temperature settings can be customized according to workpiece dimensions, production capacity requirements, and adhesive curing temperature curves.