Mask & Respirator Breathing Resistance TesterRespirator Breathing Resistance Tester is used to measu
WhatsApp : +86 15601902607
Email : info@qinsun-lab.com
The Mask Respiratory Resistance Tester is designed to measure the inhalation and exhalation resistance of respirators and masks under controlled conditions. The instrument simulates real human breathing through a 3D-printed standard head mold and accurately measures flow resistance at specified airflow rates. It provides precise evaluation of mask performance, including ordinary masks, dust masks, medical masks, and anti-fog respirators, and is suitable for both manufacturers and national inspection agencies.
The Mask Respiratory Resistance Tester is applicable to respiratory resistance evaluation across the following industries and products:
(1) Medical and Healthcare Industry: surgical masks, medical face masks, N95/FFP masks, disposable masks — testing inhalation and exhalation resistance
(2) Personal Protective Equipment Industry: dust masks, anti-fog masks, respirators — evaluation of airflow resistance and wearer comfort
(3) Quality Control: production batch verification, mask material compliance testing for breathing resistance standards
(4) Research and Development: development of new mask and respirator materials, optimization of airflow and comfort
(5) Third-Party Testing Laboratories: certification testing, laboratory evaluation of mask respiratory resistance
The instrument is widely used for product development, production quality control, R&D, and laboratory testing.
The instrument complies with and can be applied to the following standards (including but not limited to):
(1) EN 149-2009, Sections 7.15 & 8.3.4 – Respiratory Protective Devices — Testing of Breathing Resistance
(2) EN 13274-3 – Respiratory Protective Devices — Determination of Breathing Resistance
(3) GB 19083 – Technical Requirements for Medical Protective Masks
(4) GB 2626 – Respiratory Protective Equipment: Filtered Particulate Respirator
(5) NIOSH 42 CFR Part 84 – Certification Requirements for Respiratory Protective Devices
(6) JIS/T 8151 – Testing Methods for Respiratory Protective Devices
(1) Touch screen control with English menu and man-machine dialogue mode, easy to operate
(2) Built-in thermal printer for immediate on-site test results
(3) Configurable breath detection and inhalation detection modes
(4) Automatic respirator pipeline switching prevents accidental disconnection or misconnection
(5) 3D-printed standard head mold simulates real human inhalation and exhalation for accurate data
(6) High-precision thermal mass flow sensors with no temperature or pressure compensation required
(7) Micro-manometer sensor with high accuracy (-1000 Pa to 1000 Pa) and adjustable damping
(8) Integrated gas path conversion for rapid switching between inhalation and exhalation pipelines
(9) Data logger with graphic dot-matrix LCD (128 × 64) and 4M memory
(10) Stable suction volume (40–100 L/min) and constant ventilation (85 L/min)
| Item | Specification |
|---|---|
| Inhalation Flow Rate | 30 L/min, 95 L/min |
| Exhalation Flow Rate | 160 L/min |
| Flow Impact Test Rate | 300 L/min |
| Flow Sensor | Thermal mass flow meter, high sensitivity |
| Micromanometer Range | -1000 Pa – 1000 Pa, accuracy 1 Pa |
| Head Mold | 3D-printed standard head, simulates human inhalation/exhalation |
| Suction Pump | 40–100 L/min |
| Ventilation Volume | Constant 85 L/min |
| Data Logger | Graphic dot-matrix LCD, 4M memory, Chinese/English interface |
| Power Supply | AC 220 V, 50 Hz |
Main testing unit with suction and ventilation system
3D-printed standard head mold
Inhalation and exhalation tubing systems
Thermal mass flow sensor and micromanometer sensor
Built-in thermal printer
Data logger and controller
Power cable
Operation manual
Calibration certificate
(1) Connect the mask to the inhalation/exhalation pipelines of the standard head mold
(2) Set the airflow rate according to the required test protocol
(3) Start the instrument and begin automatic measurement
(4) Record inhalation and exhalation resistance values
(5) Repeat tests for multiple specimens or different flow conditions
(6) Use the built-in printer or data logger to save results
(7) Clean the head mold, tubing, and sensors after testing
(1) Do not carry the instrument by the bottom of the control box to avoid damage
(2) Wipe electroplated parts with oil to prevent rust
(3) After testing, clean the instrument and lubricate moving parts to maintain sensitivity
(4) Wipe control panels and display screens with a dry cloth to protect electronics
(5) Store all fixtures and joint accessories properly, applying anti-rust oil if necessary
YouTube video introduction:https://www.youtube.com/watch?v=wXk3LRkuu8I
YouTube video introduction:T203 N95 KN95 mask leakage testing equipment
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Company Phone
+86-21-6420 0566
Working hours
Monday to Friday
Mobile phone:
13816217984
Email:
info@qinsun-lab.com
