Diaper Anti-Side Leakage Performance Tester

The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure the liquid loss of nonwoven materials and evaluate the anti-side leakage performance of diapers. It is widely used in the research and development, quality control, and performance testing of baby diapers, adult diapers, sanitary napkins, and other absorbent hygiene products. This instrument provides reliable, quantitative data to guide material design, production optimization, and product performance improvements.

Application

(1) Baby diapers, training pants, and pull-up diapers

(2) Adult incontinence diapers and absorbent briefs

(3) Sanitary napkins, panty liners, and menstrual products

(4) Absorbent underpads, bed pads, and protective sheets

(5) Nonwoven materials, superabsorbent polymers (SAP), and top sheet materials

(6) Liquid barrier and acquisition layers in diaper prototypes

(7) Laboratory testing of raw materials and finished products

(8) Production line quality control and pre-shipment inspection

Standards

The instrument is designed to meet multiple national and international standards, including:

(1) GB/T 28004.1-2021 — Diapers Part 1: Baby Diapers

(2) GB/T 28004.2-2021 — Disposable Diapers Part 2: Adult Diapers

(3) EDANA 152.0-99 — Absorbency Test Method for Nonwoven Materials

(4) ISO 9073-11 — Textiles — Test Method for Liquid Loss in Nonwovens

(5) ASTM F1911 — Standard Test Method for Absorbency of Disposable Hygiene Products

(6) JIS L 1096 — Testing Methods for Disposable Absorbent Products

Features

(1) Measures key liquid retention and leakage properties for accurate performance evaluation.

(2) Adjustable pressure and timing controls to simulate real usage conditions.

(3) Suitable for various product types, including baby and adult diapers, sanitary napkins, and absorbent pads.

(4) High-precision measurement ensures repeatable and reliable results.

(5) User-friendly interface for easy operation and monitoring.

Parameters

Accessories

(1) Main unit ×1

(2) Sample holders ×2

(3) Instruction manual ×1

(4) Power cable ×1

(5) Calibration weights or pads (if applicable)

Test Procedures

(1) Prepare the sample and place it in the designated holder.

(2) Adjust the test pressure and set the required test time.

(3) Pour the standard test liquid onto the sample.

(4) Start the test and allow the instrument to measure liquid loss and side leakage.

(5) After the test, record the measurement data.

(6) Clean the sample holder and instrument surface before the next test.

Maintenance Information

(1) Regularly clean the sample holder, test platform, and liquid channels to prevent residue buildup.

(2) Check electrical connections and ensure proper grounding before operation.

(3) Calibrate the instrument periodically to maintain measurement accuracy.

(4) Avoid exposure to corrosive liquids or extreme environmental conditions.

(5) Replace worn or damaged parts promptly according to the manufacturer’s instructions.