Molten metal tester counts drops until specimen temperature rises 40°C.
Email: info@standard-groups.com
The instrument is used for determining the behavior of materials exposed to small splashes of molten metal. A welding wire is melted by a burner and drops onto the specimen. The number of molten drops which drop on one point of the vertically fixed specimen is counted until the temperature in the temperature sensor behind the specimen rose by 40°C. The burner is adjusted by a mass-flow meter with manual control valve. The skipping speed of the welding wire can be adjusted as well. The power supply for the controller is provided by an IEC-320 AC power cord set 230 VAC (50/60 Hz).
Technical Parameters
| Items | Parameters |
| Sample geometry | Textiles |
| Test standards | DIN EN 348 |
| Sensory function | Temperature |
| Power | 230 VAC / 30 VA Oxygen / Acetylen |
| Dimension | 1200 x 1000 x 600 mm (W x D x H) |
| Weight | Ca. 50kg |
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
Company Phone
+86-21-6420 0566
Working hours
Monday to Friday
Mobile phone:
13816217984
Email:
info@qinsun-lab.com
