Astm d4846 snap button pull tester

Testing Standards

ASTM D7142-2/F963. CFR 1500. EN 71 PART 1. GB 6675. ISO 8124. M&S P115A

Product Information

TheSnap Tester consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a stand. The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp.

By turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded. Capability can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others.

Application

Snap Tester (button pull test machine), to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester for compression and tensile testing of small samples(special attachments are available).

This snap button pull test machine consists of an upper snap clamp, a lower fabric clamp and force gauge mounted on a stand, a hand wheel on the bottom of snap tester, all these fasteners pull out test equipment which allows fine control with convenient operation, which makes the pull out test equipment very easy to use.

Snap Tester is used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments.

Product Parameters