Wire Winding and Torsion Test Machine

Equipment Overview：

Electronic torsion testing machine is composed of loading system, transmission system, data collection, processing, control,display system, etc. It is suitable for testing the mechanical properties of various torsional elastic components, components,bolts, etc. The machine adopts a horizontal structure, embedded high-performance single-chip MCU controller, LCD display, full Chinese operation and display interface, the display information is intuitive and easy to read, multi-button operation, and Chinese display interface make your operation easier. Complete the system parameter settings according to the customary prompt interface sequence. It adopts AC servo motor and precision reducer transmission, which has the characteristics of uniform loading, stability, no impact phenomenon, and accurate data acquisition and control. The whole machine uses the all-digital ZC Test smart data acquisition and processing system and liquid crystal display system to conduct multi-point testing of the torsion angle of the sample.

Products Description：

This machine is a testing machine for testing the toughness and adhesion properties of steel and aluminum wires. It is used for winding and torsion of aluminum wire, copper rod, steel wire and steel core aluminum stranded wire.

Overall machine structure and control system description:

[Main machine] adopts a horizontal structure, and the main structure adopts an overall thickened steel plate structure to ensure the rigidity of the whole machine; the clamps adopt high-quality carbon steel 45 quenching (HR55~65) method, which has a long service life; the installation and disassembly of the specimen are convenient and Fast.

[Drive system] Fully digital ZCTestmart control system drive; adjustable speed, uniform and stable loading.

[Transmission system] Adopts precision reducer transmission to ensure uniformity, stability and transmission accuracy.

[Measurement display system] This machine uses a large-screen liquid crystal display system to simultaneously display the torque T, torsion angle θ, and test speed of the sample. The system can set the torsion angle θ to detect the torque of the specimen, and can also set the torque to detect the torsion angle of the specimen.

[Safety protection system] Overload protection, over-current protection, etc.

Working environment requirements :

1 At room temperature within the range of 100C to 350C, the relative humidity is ≤80%;

2 On a stable foundation or workbench;

3 In an environment with no vibration and no corrosive media around;

4 The fluctuation range of the power supply voltage should not exceed ±10% of the rated voltage.

Features:

1.Work times can be set and stop automatically.

2.The counterweight is lifted by hand winch, which is easy to operate.

3.After the sample is twisted and broken, touch the micro switch to accurately record the number of turns.

Applicable standards:

GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method"

GB/T 239.2-2012 "Metal materials wire Part II Bidirectional torsion test method"

ISO 7800:2003 "Test method for unidirectional torsion of metal wires"

ISO 9649:1990 Test method for bidirectional torsion of metal wires

GB/T2611

JB/T6147

Specification：

Product name：Metal Wire Torsion Testing Machine

Working type：Automatic loading

Display type：LCD English Menu display

Diameter of clamping metal wire:5.0≤d(D)≤10.0

Space between two fixtures：500mm

Clamping range of jaws：5.0-10.0mm

Torsion speed：15,30,60r/min

Speed error：<±10%

Size of testing machine(length*width*height):1360×430×600mm

Weight of testing machine(Net weight):140kg

Min reading value of turns number:0.1

Power supply:AC220V 50 Hz

Noise:<70 dB(A)

Assembly quality:Conform to national standard GB/T2611

Packing and transportation:Conform to national standard JB/T6147

Tools, and farmars:1set

Technical documents etc：1piece

Another model:

Wire Torsion Testing Machine