Snap button pulling testing machine

The button snap pull testing machine is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the hand wheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded.

The capability of the snap tester can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others, beyond these, you will find more applications for this push pull test equipment for your testing purpose.

Snap button tester Included Accessories

1 Lower Fabric Clamp, Lever Armlocking

1 Upper Stud Clamp

1 Upper Snap Clamp

1 Three Pronged Clamp

1 Two Pronged Clamp with screw

1 Lower Grasp Button Kit

1 Long Nose Vice Grip

1 Safety Goggles

5 Rubber Rings

1 Operation Manual

Testing Standards:

ASTM D7142-2/F963, CFR 1500, EN 71 PART 1, GB 6675, ISO 8124, M&S P115A

Applications:

Snap Tester is used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments.

button snap pull out tester