The high and low temperature test chamber is mainly used for testing the high and low temperature resistance test performance of products, and is a high-end precision testing equipment.
In addition to daily use, it is also essential to protect the high and low temperature test chamber after use. In this chapter, the editor will talk to you about 6 cleaning tips for the high and low temperature chamber and low temperature test chamber. Good method:
Tips for cleaning the high and low temperature test chamber. Quotes
1. Before the test, the internal contamination of the high and low temperature test chamber must be cleaned. Cleaning;
2. The power distribution room should be cleaned more than once a year. When cleaning, you can use a vacuum cleaner to suck out the indoor dust;
3. The humidifier should be replaced once a month, and the stored in the humidifierWater should be checked and maintained to ensure clean water quality;
4. To ensure smooth water flow, the humidifying water bowl should be cleaned once a month;
5. The body of high and low temperature The test chamber should be cleaned regularly. When cleaning, simply scrub with soapy water.
6. Wet bulb of high and low temperature test chamber Replace the gauze and replace the wet ball gauze once every three months;
If the surface of the wet ball gauze is dirty or hard, or after temperature control is complete, the wet ball gauze must be replaced before continuing to control temperature and humidity.
To ensure thatthe high and low temperature test chamber can provide good test performance, equipment operators can maintain the equipment regularly according to the 6 points summarized above.
This equipment is widely used in various industries such as colleges and universities, aerospace, electronics and electrical.