The vibration detector is a newly developed instrument for machine condition monitoring based on a microprocessor. It has the functions of vibration detection, bearing condition analysis and infrared temperature measurement.
It is easy to use and automatically displays status alerts. It is very suitable for on-site equipment operation and maintenance personnel to monitor equipment status, detect problems in time, and ensure normal and reliable operation of equipment.
Maintenance and maintenance of vibration meter
1. The vibration meter uses an accelerometer, so contact is strictly prohibited.
2. The acceleration sensor should match the number on the back of the instrument, otherwise it will affect the accuracy of the measurement.
3. When using non-integrated wire conductors, do not stretch the wiresForce.
To avoid wire breakage or poor contact.
4. The instrument should be stored at 0-50 degrees and the humidity should not exceed 90% relative humidity.
5. Provided that the rules of use, storage and transportation are complied with;
As soon as the instrument is found to be defective, please return it Take it to the original manufacturer or representative. Check and repair it. Do not disassemble it yourself.
Working principle
Electrical measurement method:
Convert the vibration amount of the measured object into electricity. Then use a power meter to measure.
Mechanical method:
Use the lever principle to amplify the vibration amount and record it directly.
Optical method:
Use the optical lever prince to measureip, the reading microscope, the light wave interference principle, the laser Doppler effect, etc.
Application
Vibration measuring instruments are reliable inspection and detection instruments for maintenance personnel to carry out condition monitoring (CBM) of factory equipment and realize predictive maintenance. A powerful tool for equipment reliability management and TPM.
It is easy to use and is particularly suitable for equipment inspection and maintenance personnel. It is also suitable for on-site production workers to measure, record and track equipment status, detect anomalies, etc. to be able to identify common problems. Diagnosis and trend monitoring of machine vibration faults.