The separator funnel's speed-adjustable oscillator is safe and easy to use, and its stepless speed adjustment and vertical rotation are stable. It is an indispensable experiment for scientific research, teaching and production departments such as plants, biological products, genetics, viruses, medicine and environmental protection. Room equipment.
The vertical workbench is equipped with a special clamp that can accommodate a variety of test bottles and oscillate and stir evenly under the same conditions.
Particularly suitable for the cultivation and preparation of biological samples for various comparative tests.
Separatory Funnel Oscillator Maintenance
Proper use and attention to maintenance of the instrument to keep it in good working condition can extend its service life Lifespan.
During continuous operation of the device like thisA periodic inspection should be carried out every three months: Check whether water drops, dirt, etc. fall on the motor and controls. p>
Check fuses, control components and mounting screws.
The bearings of the transmission part were filled with an appropriate amount of grease (calcium sodium based No. 1) before leaving the factory. During continuous operation of the instrument, grease should be refilled every six months. The filling quantity takes up approx. 1/3 of the storage space.
Natural wear and tear is normal after prolonged use of the instrument.
If after using the instrument for one year, it is found that the motor makes abnormal noise; the bearings in the transmission part are worn, the belt is loose or broken; the electronic control component fails... etc.
Maintenance
Proper use and attention to maintenance of the instrument in order to eKeeping s in good working condition can extend the life of the instrument.
During continuous operation of the device, regular inspections should be carried out every three months: Check whether drops of water, dirt, etc. fall on the motor and controls; Check fuses, control components and tighten screws.
The bearings of the transmission part were filled with an appropriate amount of grease (calcium sodium based No. 1) before leaving the factory. During continuous operation of the instrument, grease should be refilled every six months. The filling quantity takes up approx. 1/3 of the storage space.
Natural wear and tear is normal after prolonged use of the instrument.