The cardboard box clamping force testing machine is suitable for testing and verifying all product packaging, testing the deformation of product packaging under horizontal pressure during transportation and storage, as well as the packagings ability to protect internal packaging materials, in order to improve packaging design.
Compliant with standards:>
ASTM D6055, SEARS, enterprise standards, or customized according to customer specified non-standard requirements
Technical parameters:>
Sample shape: parallelepiped transport packaging
Test weight: 10-300kg
Clamping pressure: According to the handling diagram on the test sample, 400-3000Lb (adjustable) can be applied on the corresponding surface
Clamping board surface size: 1200 x 1200mm (length and width)
Test space size: 1200 x 1200 x 1000mm (length, width, height)
Clamping space: size 400 * 1200 * 1200
Height adjustment of clamping plate: 0~1000mm can be set
Lifting speed: adjustable from 10 to 600mm/min
Clamping speed: 10-50mm/min adjustable
Splint expansion width: 200-2000mm
Transmission method: servo motor (left and right clamping)
Bottom plate size: 2200 x 2100mm
Protection device: Leakage protection limit device
Clamping requirements: Two clamping plates must be flat and not deformed in working condition (2000 pounds). The two splints are parallel and perpendicular to the floor. The thickness of the plywood shall not be less than 20mm
Force corrector: with force value display, used to correct clamping pressure
Power accuracy: standard 1.6 level
Experimental operation: Simulate the actual operation of a forklift by manually operating the lever to control the clamping, opening, lifting, and lowering actions
Power supply: AC220V 50HZ