The ATLAS Ci4000 xenon lamp aging testing machine adopts a water-cooled xenon lamp and a new digital control system, which has established a monument in the application of digital and optical technology to aging testing instruments. The Ci4000 series has been recognized by numerous manufacturers in the automotive, plastic, paint coatings, inks, packaging, photochemical materials, pigments, dyes, stabilizers, and additives industries, and is considered the only device that accurately and repetitively predicts product lifespan. The Ci4000 series has obtained certifications from international standard organizations such as CE, UL, CAS, ISO, and EN.
Compliant with standards:>
1. AATCC TM16-1998 Textiles - Color fastness to light
2. AATCC TM16-2004 Textile Color Fastness to Light
3. Climate resistance of AATCC TM169 textiles: xenon lamp irradiation
4. ASTM C1442 Practice for Testing Sealing Materials Using Artificial Weathering Meters
5. ASTM D2565 Standard Practice for Xenon Arc Exposure Devices for Outdoor Plastics
6. ASTM D3424 Evaluation Specification for Relative Light and Weather Resistance of Printed Materials
7. ASTM D4303 Standard Test Method for Photostability of Colorants Used in Artistic Materials
8. ASTM D4355 Standard Test Method for Aging of Geotextiles Exposed to Light, Moisture, and Heat in Xenon Lamp Equipment
9. ASTM D4459 Standard test method for exposure testing of indoor plastic xenon lamps
10. ASTM D4798 Standard Test Method for Accelerated Aging Test Conditions and Test Procedures of Asphalt Materials (Xenon Arc Method)
11. ASTM D5071 Exposure Procedure for Photodegradable Plastics in Xenon Arc Exposure Apparatus
12. ASTM D6551 Standard Test Method for Accelerated Aging of Pressure Sensitive Strip Using Xenon Lamp Exposure Device
13. ASTM D6695 Practice for Xenon Arc Exposure of Paints and Related Coatings
14. ASTM D904 Exposure Procedure for Adhesive Specimens under Artificial Light
15. ASTM E1596 Test Method for Solar Radiation Weathering of Photovoltaic Cell Simulators
16. ASTM G151 Practice for Exposure of Non metallic Materials in Accelerated Testing Devices Using Laboratory Light Sources
17. ASTM G155 Operating Procedures for Xenon Arc Lamp Equipment for Exposure of Non metallic Materials
18. Water cooled xenon arc lamp testing of FLTM BI160-01 automotive interior materials under controllable irradiation
19. GME60292 Test Method for Color Fastness Using Artificial Light
20. GMW14162 Resistance to Artificial Climate Aging
21. GMW 3414 Artificial Aging Test Method for Automotive Interior Materials
22. ISO 105-B02 Textiles - Color fastness tests - Part B02: Color fastness to sunlight: Xenon arc lamp test
23. ISO 105-B04 Textiles - Tests for Color Fastness - Part B04: Color Fastness to Climate: Xenon Arc Lamp Test
24. ISO 105-B06 Textiles - Tests for Color Fastness - Part B06: Color Fastness and Aging of Artificial Light at High Temperature: Xenon Lamp Test
25. ISO 105-B10 Textiles - Tests for Color Fastness - Part B10: Artificial Climate Aging: Filtered Xenon Arc Radiation Exposure
26. ISO12040 Printing Technology - Prints and Oils - Evaluation of Light Fastness using Filter Xenon Arc Lamp
27. ISO3917 Road Vehicle Safety Glass Materials - Test Methods for Resistance to Radiation, High Temperature, Moisture, Combustion, and Simulated Climate
28. ISO4892-1 Plastics - Methods of exposure to laboratory light sources - Part 1: General principles
29. ISO4892-2 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps
30. JASO M346 Automotive Interior Xenon Arc Lamp Illumination Test
31. MIL-STD810F Environmental Engineering Considerations and Laboratory Testing - Part 2: Laboratory Testing Methods -505.4: Solar Radiation (Sunlight)
32. MIL-STD810G Environmental Engineering Considerations and Laboratory Testing - Part 2: Laboratory Testing Methods -505.5: Solar Radiation (Sunlight)
33. PV 1303 Non metallic Material Automotive Internal Space Structural Parts Light Exposure Test
34. PV 3929 Dry hot climate test for non-metallic materials
35. SAE J2412 accelerates exposure of automotive interior decoration materials to sunlight using a controllable xenon arc tester
36. SAE J2527 Performance standard for accelerated irradiation of automotive external materials using a irradiated xenon arc device
37. VDA621-429 Test for Weathering Color Fastness of Automotive Coatings
38. VDA 621-430 Testing the Crack Resistance of Automotive Coatings
39. VDA 75202 Automotive Interior Materials - Xenon Arc Lamp Color Fastness Aging Test at High Temperature
40. VW PV 3930 Non metallic Materials - Weathering, Damp, Hot Climate Test
Applicable scope:>
Used for automotive materials, plastics, inks, paints and coatings, packaging, photochemical materials, pigments, dyes, stabilizers and additives, industrial and surface textiles, etc; Used for testing and evaluating material aging.
Product Introduction:>
The ATLAS Ci4000 xenon lamp aging testing machine adopts a water-cooled xenon lamp and a new digital control system, which has established a monument in the application of digital and optical technology to aging testing instruments. The Ci4000 series has been recognized by numerous manufacturers in the automotive, plastic, paint coatings, inks, packaging, photochemical materials, pigments, dyes, stabilizers, and additives industries, and is considered the only device that accurately and repetitively predicts product lifespan. The Ci4000 series has obtained certifications from international standard organizations such as CE, UL, CAS, ISO, and EN.
Features:>
1. Supporting 6500W high-power precision water-cooled xenon lamp tubes
2. Total exposure area: 6500 cm2 (1008 cm2)
3. Automatic rotating 3-layer sample holder
4. Large screen full color TFT display for automatic diagnostic information
5. Directly set and control irradiance at 340nm/420nm, 300-400nm
6. Directly control the temperature inside the box and the temperature on the blackboard or/and black label
7. Directly setting and controlling relative humidity
8. Directly set and control the air temperature inside the test chamber
9. Display diagnostic information
10. Built in 14 major international standards
11. Supports custom programming for 12 customers
12. Multilingual display (Chinese, English, French, German, Western, Japanese, Korean)
13. USB data output interface
14. Smart Damper with built-in global patents? Automatic air supply speed regulation and intelligent air conditioning system
15. Smart Light with built-in global patents? Intelligent lighting monitoring system
16. Spray system on the back of the sample rack
17. Filter combinations to meet all testing criteria
18. Dust removal filter for intake pipe
19. CS-7 Xenon Lamp Cooling System
20. Automatic water quality monitoring and automatic alarm
21. Calibration reference xenon lamp;
22. The observation window of the test chamber is made of 316 grade stainless steel;
23. Global universal power system, suitable for various frequencies, voltages, and electrical requirements
24. Electrical safety performance meets CE, UL, CSA, EN, and ISO standards
25. Automatic countdown function based on irradiation amount and time
26. The sample rack can accommodate various types of samples
27. VibraSonicTM humidification system
Technical parameters:>
1. Light source: 6500W water-cooled xenon lamp
2. Service life (1 solar standard): 1200 hours
3. Filter: replaceable inner and outer filters
4. Irradiance control: Select single point automatic control for 340/420 or 300-400nm, with optional second point monitoring
5. Light monitoring: SmartLightTM monitor
6. Relative humidity control: automatic
7. Humidity range: Light cycle: 10-75% (temperature dependent), dark cycle: up to 100%
8. Temperature control: automatic
9. Blackboard or black label temperature: BPT 40-110 ℃/BST40-120 ℃
10. Simultaneously controlling BPT or BST and temperature inside the box: standard
11. BPT/BST dual control: optional
12. Sample holder type: 3 layers
13. Exposure test area: 6500cm2 (1008cm2)
14. Power supply: three-phase three wire 200-250V 50A 50/60HZ 9.5KW three-phase four wire 340-415V 47A 50/60HZ 9.5KW
15. HVAC-MJ/h (BTU/h) (maximum): 41.36MJ/h (39203BTU/h, 450CFM)
16. Compressed air: 0.11m3/min (maximum 4CFM), @ 552kPa, (80psi)
17. Water flow rate:
(1) Pressure: 138-345kPa (20-30psi)
(2) Humidification: Deionized water 0.2 L/min
(3) Sample spray: deionized water 0.2 L/min
(4) Sample rack spray: deionized water 0.2 L/min
(5) Xenon lamp cooling flow rate @ 4000W: deionized water 1.5L/min
18. Dimensions (L x W x H): 127 x 102 x 198cm
19. Base: 148 x 274cm (including access room)
20. Weight: 641kg (1410lb)
Standard configuration:>
1. 1 host
2. 4000 hour spare parts kit (2 xenon lamps, 2 external filters, 10 external filters, etc.)
3. 1 standard calibration lamp tube
4. 1 set of blue standards (meeting AATCC ISO and other standards)
5. 1 set of 3-layer rotatable lantern holder
Optional attachments:>
1. BPT/BST dual control: optional
2. Irradiance control: Select single point automatic control for 340/420nm or 300-400nm, with optional second point monitoring
3. Refrigeration coil installed in the air duct (excluding necessary refrigeration devices)
4. S3T specific sample surface temperature system
5. WXView (Climate Observation) Data Acquisition System
6. LiquiAirTM - LiquiAir Self service Xenon Lamp Cooling System
7. Auxiliary lantern frames that meet special testing requirements
8. Caster (4-pin) includes adapter and installation instructions
9. LS-200 full spectrum monitoring equipment
10. Stretching legs (4 feet: lifting device 15cm)
11. XenoCal? Radiation calibration equipment
12. Environmental Air Conditioning Unit (ACU)
13. Pure water system
14. Ice water system
15. Air compression system