Face Mask Air Exchange Pressure Difference Tester Applications:
Medical Mask Differential Pressure Tester or Medical Mask Differential Pressure Tester, is a lab testing instrument for determination breathability of medica face masks, the test principle is, through measuring the differential pressure required to draw air through a measured surface area at a constant air flow rate, to test the air exchange pressure of the medical face mask material, which indicates the breathability of medical face masks.
Built-in water-filled differential manometer is used to measure the differential pressure, a mass flow meter is used for measurement of the airflow. An electric vacuum pump draws air through the medical mask breathability tester and a needle valve is used to adjust the airflow rate.
Medical face masks differential tester complies with standards like EN 149, EN 14683, ASTM F2100, MIL-M-36954C, GB 19083, GB 2626, YY/T 0969-2013.
Standards:
EN 149,
EN 14683,
ASTM F2100,
MIL-M-36954C,
GB 19083,
GB 2626,
YY/T 0969-2013
Specifications:
Air source: Suction pump
Air flow: 8L/min
Sealing method: Mechanical face seal
Diameter for circular sample holder: Ф25mm
Differential pressure transducer:0-500Pa
Display: Digital display
Power supply:220 AC 50Hz
Dimension: 550mm×400mm×700mm
21.65inch×15.75inch×23.62inch
Net weight: 40 kg
88.18lb
Medical Face Mask Air Exchange Pressure Difference Tester Feature:
Suction chamber air source to provide the pump.
High resolution differential pressure transducer with digital display for results.
Special sample holder to ensure holding sample
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
