GB24539 Liquid Penetration Tester for Protective Clothing>
Splash Jet Waterproof Tester for Medical Anti-Acid and Alkali Clothing>
【Scope of application】JIGAO-259B type chemical protective clothing leak tester (leak tester for medical anti-acid and alkali splash clothing), >Applicable based on various requirements of textile and clothing, petrochemical, labor protection, quality control and inspection and other industries and institutions for protective clothing leak testing, it is used to develop chemical protective clothing, quality control in the production process and liquid tightness when using chemical protective clothing. Performance testing provides a scientific and reliable basis.
【Test standard】
Annex I of GB 24540-2009 Method for testing the waterproofness of protective clothing against acid and alkali chemicalschemicals
Annex J of GB 24540-2009 Test Method for Liquid Impermeability of Protective Clothing against Acid and Alkali Chemicals
GB24539-2009 Annex B Test Method for Liquid Penetration of Chemical Protective Clothing
GB24539-2009 Appendix D Chemical protection Test method for waterproof clothing
【Test principle】
Chemical protective clothing worn on a test model or human test object , is subjected to a certain pressure and flow rate according to the specified time. After spraying (spray method) or splashing (spray method) of the solution to be tested, examine the inside surface of the chemical protective clothing and the surface of the water-absorbing indicator clothing worn by the test model or person, and determine the chemical protective clothing in comparison with the area of the standard spot The waterproof properties of the protective clothing.
GB24539 Fluid Penetration Tester forprotective clothing>
Leak tester for medical clothing with acid and alkali protection>
【Technical parameters】
1 . Time setting range: 0 ~ 99.99s Resolution: 0.01s
2. Turntable speed: 1 rpm
3. Nozzle mounting distance on nozzle: 450 mm
4. Distance between nozzle center and turntable center: 1500 mm
5 . Nozzle spray angle: 75°
6. Liquid supply pressure: 300 kPa (splash test)
7. Spray flow: 1.14±0.1 l/min
8. Distance between injection pressure gauge and nozzle opening (80 ± 1)
9. Liquid pressure on injection gauge is 150kPa
10. Working power: AC220V ± 10% / 50Hz Total power: ≤ 1.65 kW
11. Appearance: 2000×1000×2940mm (test room)
800×600×750mm (hostt-controller)
12. Weight: 550 kg