Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
JG815F Flame retardant performance tester for protective clothing Free shipping all over the country, free debugging
【Scope of application】
The JG815F flame retardant performance tester for protective clothing is suitable for testing the flame retardant performance of various fabrics and products, such as protective nets, protective clothing, seat belts, etc.
【Reference standards】
GB5455-2014, GB6529, GB5725-2009, GB 8965.1-2009 etc.
JG815F Flame Tester for Protective Clothing 【Technical Parameters】
1. Touch display/control
2. Equipment It is divided into two parts, the control part and the combustion chamber. The size of the combustion chamber is 330*330*765mm
3. The front of the combustion chamber is a tempered glass inspection door /p
4. The top of the chamber is flat 16 outlets distributed with an inner diameter of 12.5mm, 6 outlets distributed on both sides of the combustion chamber with an internal diameter of 12.5 mm
5. The top plate is installed at the top of the box
6. The box top bracket can hold the template clamp, and the bottom of the template clip is located 17mm higher than the highest point of the igniter nozzle
7.The inner diameter of the igniter nozzle is 11mm, and the angle between the pipe head and the vertical line is 25deg;. Ignition time: *accurate to 0.5 s
8.Gas source: industrial propane, butane or propane/butane mixture, with sample pre-treatment in accordance with 7.3 purity of at least 97% methane gas
9. Sample size: 300*89 mm, five pieces horizontally and vertically
10. Ambient temperature: -10℃～30℃
11 , Power supply voltage and power: 220V plusmn; 10% 50Hz, power less than 100W
12. Bunsen burner applies flame time 0-99M99S, can be set arbitrarily, thenaccuracy plusmn; 0.1 s (standard takes 12 s)
13. Afterglow time: up to 0-99M99S
14. Bunsen burner blue flame height: 15mm-175mm can be adjusted arbitrarily, equipped with flame height scale (height 40mm)
15. Bunsen burner automatic ignition, automatic time, ignition time can be set arbitrarily (can be preset)
16. Touch related options:
a. Size : 7effective display size, length 15.5cm, width 8.6cm;
b. Resolution: 800*480 Communication interface RS232, 3.3V CMOS or TTL, serial port /p
d. Storage capacity: 1 GB
e. Using purely hardware FPGA driver display, quot;zeroquot; startup time
f. Using M3 + FPGA architecture, M3 is in charge of instruction analysis, FPGA focuses on TFT display
g. The main controller uses a low-power processor, automatically enters the power-saving mode
JG815F Flame retardant performance tester for protective clothing Free shipping all over the country, free debugging
