Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
2. Place the object to be tested on the workbench and use a fixture to clamp it firmly;
3. Adjust the height of the upper and lower cross bars to make the distance between the clamps appropriate.
4. Adjust the speed knob to make the speed meet the requirements
5. Clamp the lower end of the test piece with the lower clamp, raise the lower cross bar to a proper distance and then stop the machine, and then clamp the upper part of the test piece with the upper clamp.
6. Turn on the Fabric Tensile Tester power, start the operation, adjust the experiment stroke, and stop after adjustment;
7. When everything is ready, press the up or down push-pull test to start the test.
8. When repeating the experiment, you can repeat the above operations. When you need to stop in the middle, you can press the stop switch, and you can continue after pressing the start;
9. After the test, adjust the displacement to the minimum and the speed to the minimum, and then turn off the power.
More about theUniversal Tensile Strength Tester information , Leave Message
Contact Us Now!
Sales Dept Tel:+86-21-6780 0179
Email:info@qinsun-lab.com
