Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
The determination of the hydrostatic pressure resistance of the fabric is one of the most important indicators for assessing the waterproofness of textiles. The fabric hydrostatic pressure resistance tester is a testing instrument. Textile testing equipment, welcome customers who need to inquire in time. Waterproof performance is measured by measuring the height difference of static pressure maintained by the test sample before water ingress. One side of the test sample is clamped tightly with a clamp and the other side is exposed to the water pressure which increases at a constant rate The height of the water column required for penetration (shown according to the indicator paper) is the water resistance of the sample under the test conditions, and a hydrostatic pressure tester for textiles is designed accordingly.
The fabric hydrostatic pressure tester is used to measure the hydrostatic pressure resistance of waterditest real fabrics, suitable for tight fabrics, such as canvas, tarpaulin, tarpaulin, tent cloth, rainproof clothing
Test standard:
GB 4744 Measurement method for waterproofness of textile fabrics - hydrostatic pressure test method
Test operation:
Cut the test substance into a sample of 100mm × 100mm, place the sample in the clamp, tighten and fix the clamp. Press the up button, the metal container with 700ml of water starts to rise at a constant speed driven by the motor, and the water pressure is increased on the sample in the fixture, and the water is measured by measuring the color change of the indicator observe paper covered on the filter paper sample through the plastic window of the penetration fixture. When it efirst signal appears indicating the color change of the paper (from blue to pink), then immediately read the height of the water level on the scale, expressed in Pa (mmH20), and press the up button again to increase the stop water level. metal holder. Record the readings as the test data for the water tightness of the filter paper.
Open the fixture, take out the sample and indicator paper, dry the loading window of the fixture with a soft cloth and check the water level in the fixture. Top up with water if necessary. Use another sample and indicator paper to put it back on the fixture and repeat the test steps above for the test.
Advantages and features:
1. The company has been engaged in instrument testing for more than ten years and has a after-sales service team;
> 2. Can be different
3. Spare parts are available to solve the problem of a long timeresolve delivery time for ordering spare parts;
4. Provide outsourced maintenance services;
5. Long-term supply of various commonly used test instruments;
6. Keep up with the update of industry standards and care for test instruments that meet the new standards in time.
