The Toy Scooter Strength Tester is suitable for testing the strength of the steerer tube of toy scooters, including resistance to downforce and upforce.
oPfTextile Testing Instruments, Testing Equipment Manufacturer
How do I test the Toy Scooter Steering Tube Strength TesteroPfTextile Testing Instruments, Testing Equipment Manufacturer
1. Resistance to downward forceoPfTextile Testing Instruments, Testing Equipment Manufacturer
The toy scooter is placed on a level surface and secured so that it stands upright during the test. Check that the locking mechanism is tight.
oPfTextile Testing Instruments, Testing Equipment Manufacturer middot;A) For a toy scooter with two handles, hang a mass of (50+-0.5) Kg in the center of each handle. (See Figure 1a) Hold the load for 5 minutes. Determine if the steerer tube is collapsed and the locking mechanism is still working and engaged. R
oPfTextile Testing Instruments, Testing Equipment Manufacturer
Remove the 50 kg weight. Unlock the primary locking device while the secondary verlocking device is still engaged, in this case load each handle with a mass of (25+-0.2) kg and hold the load for 5 minutes. Determine if
oPfTextile Testing Instruments, Testing Equipment Manufacturer B) For toy scooters with steerer tubes without handles, test with loads of (10+-1 kg and (50+-0.5) kg respectively on top of the tube. (See Fig. 1 b)
oPfTextile Testing Instruments, Testing Equipment Manufacturer oPfTextile Testing Instruments, Testing Equipment Manufacturer 2. Withstand upward force
Turn the toy scooter over and secure it to the stage (See Figure 3 c) Check that the locking mechanism is secure.oPfTextile Testing Instruments, Testing Equipment Manufacturer
A) For toy scooters with two handles, hang a mass of (25+/-0.2) kg from the center of each handle. Hold the load for 5 minutes.oPfTextile Testing Instruments, Testing Equipment Manufacturer
middot;B) For toy scooters with steerer tubes without handles, place a mass (50+-0.5) kg at the end of the steerer tube and hold the load for 5 minutes. Determine if the steerer tube is disengaged and the locking mechanism can still be operated and engaged.
oPfTextile Testing Instruments, Testing Equipment Manufacturer
EN 71 Toy Scooter Sture tubes Force meter MaintenanceoPfTextile Testing Instruments, Testing Equipment Manufacturer
1. Cleaning: Use cotton to clean the fabric of toy test equipment before and after each use;
oPfTextile Testing Instruments, Testing Equipment Manufacturer 2. Anti-corrosion: clean the metal parts of the machine weekly Spray anti-rust oil (clean within 2 hours after spraying)
3. Lubricating oil: monthly add lubricating oil to the rotating parts (screw) of the machineoPfTextile Testing Instruments, Testing Equipment Manufacturer
