2022-11-18 0 Views

How to test the wear resistance of footwear

Shoes are one of the necessities of life in our daily life, and the wear test is very important

Lab

Testing. how do you test the wear resistance of footwear? Use a shoe abrasion tester.

The following are different types of shoe material friction test

1. IULTCS Veslic Leather Abrasion Tester 1st GT-KC01-1
Leather Fastness to Rubbing Tester is a testing machine that measures the surface of leather by the method of rubbing back and forth color fastness. Iultcs Crock Tester, designed to perform crock tests on leather surfaces to determine the degree of 'damage' to the leather surface or finish and to assess the amount of color transfer from the sample to the sanding pad in dry or wet conditions. This machine is suitable for all kinds of anti-fouling fur dry and wet rub resistance, as well as pes and dual-use non-shedding tests of differencevarious types of fur products and fur leather products.

2. Taber Abrasion Tester GT-C14A
Taber Abrasion Tester measures the abrasion resistance of materials and evaluates their abrasion resistance, such as measuring their mass loss, thickness loss and light transmittance Wait.

Applicable to flat products such as suitcases, carpets, cardboard, clothing, glass, plastic coatings, metal coatings, paints, varnishes, decorative panels, high pressure panels, plastics, textiles, flexible floor mats, road marking paint, ceramic tiles, anodizing, blankets, electronic components, decorative panels, waxes, labels, leather, dental materials, car interiors, resins, furniture, etc.

3. ASTM D1630 NBS Rubber Sole Abrasion Tester GT-KB02
NBS Rubber Abrasion Tester Determines resistance of vulcanized rubber or other compounds or both Abrasion resistance , use d for soleand heel.

Not recommended for materials less than 2.54 mm (0.1 in) thick.

4. Shoelace Abrasion Tester GT-KC02
Shoelace Abrasion Testing Machine is used to test the abrasion resistance of shoelaces made of cotton, hemp, chemical fiber and other materials.
Take two shoelaces and hook them in the middle. Clamp the two ends of the shoelace to the moving armature of the shoelace friction tester, which can be used for reciprocating linear motion; clamp one end of the other shoelace on the corresponding fixed fixture, and hang the other end of the shoelace with a fixed pulley Pulling heavy objects. The two shoelaces wear each other through a reciprocating linear motion. Then check the wear resistance, when the machine rotates the preset number of times, the machine will stop.

5. Martindale Abrasion Tester GT-KC13B
< >Martindale Abrasion Tester is used to measure the abrasion resistance of various shoe upper materials. The sample is rubbed under low pressure against a known amount of wear, constantly changing direction and amount of wear. The unique design allows individual sample holders to be removed for inspection without lifting the top movement plate.

Bally Leather Bend Tester for wet or dry testing

About the testing method of the drawer durability testing machine

How to test the wear resistance of footwear

News

Company News

Test operation method of glow wire tester

Standards of salt spray tester

Bacterial Filtration Efficiency Tester Of Medical protective clothing Test principle

Operating specifications of fabric surface wetting resistance tester

Why do you need a Fabric Vertical Flexibility Tester?

Welcome to order Qinsun EN iso 9237 air permeability tester

How to choose a tensile testing machine?

3 reasons for fabric color measurement cabinets