Car interior material combustion test machines are in line with GB8410, TL1010, TSM0500G and US standard FMVSS571.302.The instrument board, debris box, indoor cargo frame, or rear window sill, curtains, floor coverage, etc. And the control system is highly automated, with automatic ignition, automatic gas supply, automatic timing, manual ending test and other functions. It is convenient to observe the records, and it is stable and reliable. It is a test equipment independently developed and produced by Shanghai QINSUN Precision Electrical Technology Co., Ltd., with high cost performance and complete after -sales service.
The test machine is controlled by the control box, the burning box body, the burning light, the solenoid valve, the whole set of high -voltage ignition, thermometer, the signal control line and the upper sample, the lower bracket and the bracket, and It is composed of 500mm/1mm steel.
1) Box body size: Burning box: 385 x 204 x 360mm; electrical box; electrical box : 310 x 320 x 285mm
2) Time: 0 ~ 99 minutes 99 seconds can be set
3) Yu Yan Time: 0 ~ 99 minutes 99 seconds can be set
4) Burning angle: 90 deg; (that is, 0 deg;)
5) Buror size parameters: inner diameter of the nozzle of 9.5mm, the effective length of the ink of the nozzle, the air adjustment hole
6) Flame height: According to the standard requirements, it can be adjusted from 20mm to 100mm
7) Thermometer: 150 deg; C, resolution: 1 ℃
8) Steel plate ruler: length: 500mm, accuracy accuracy, accuracy : 1mm
9) Burning Gas: High -purity liquefied gas
10) Power: AC 220V/50Hz
1.It has more than ten years of detection instruments and has a after -sales service team;
2. It can deal with various problems in time and quickly to relieve the worries for customers;
3.The troubles of long parts of the parts;
4. Provide outsourcing maintenance services;
5. Long -term supply of various types of commonly used testing instruments;
6. Follow industry standard updates to provide tested instruments that meet the new standards in a timely manner.