The gravel resistance test machine is mainly used to accurately reproduce the phenomenon of splattered gravel. It is suitable for the adhesive destruction test of the outer coating adhesion, the bonding destruction test of different layers in the coating system, and the hard The brittleness thickness of the glass material, the thickness of the coating film, the anti -peeling, anti -collision, and anti -abrasion test of plastic and glass. It is a test equipment independently developed and produced by Shanghai QINSUN Precision Electrical Technology Co., Ltd., with high cost performance.
Testing principle:
Get piercing impact test machine is a multi -impact instrument. Its advantage is that the result is good and comparable. The sharp particle impact model, the instrument's own air storage tank can reduce the impact of the instantaneous pressure fluctuations of the external compressed air, to provide a constant impact pressure, and use vibration to feed the particles. Multi -motion display can display work pressure, test time, vibration feeding particles and the number of impact times.
Main technical parameters:
01. Work pressure range: 0 ~ 5.0kgf/cm2/level 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6, 1.6 It can be adjusted according to the actual gas source pressure of the customer, and it can reach 8.0kgf/cm2
02. Compressed inner diameter of the air pipe: 19mm or larger
03, air slot capacity accumulation: 180L can be satisfied: When opening the magnetic valve, the work pressure of 400kPa (4BAR) can continue to maintain at least 10 seconds
04, feeding method: automatic feeding, feeding speed can be adjusted
05 , VDA spray gun: 30.0 ± 0.5mm
06, SAE spray gun: 52.6 ± 0.5mm
07. Working time: 0-999s can be adjusted
08. Vibration time: 0-999s can be adjusted
09, the number of cycles: 0-99s can be adjusted
10. The collision box configuration: a 3D angle adjustable testing table, 0-180 degrees angle is arbitrarily available at best Adjustment, also equipped with a *** mobile angle display, which is convenient for customers to regulate the impact angle.
11. Standard test desk impact window: 300*300mm (the adjustable window size of the supporting frame with activity is suitable for different sample samples that are suitable for different sample samples of not more than 30mm).
12. Except the test box: about 1800 L*950 W*1500H mm; the main structure of the collision box uses a 6mm steel plate+paint; it is good.
13. Test impact material: 4mm-5mm hardness: 61HRC-65HRC with edges and cornersGravine, or 8-16mm water millstones, or stones specified in JIS A5001 can be
14. Test pressure: 100 ± 5kPa, 200kPa ± 10kPa
15. Test number: 1-5 average number of times averageCan
16. Jet time: 8-12S/500g or 30-35S/2000G
17. Jet angle: 54 ° ± 1 ° (special 90 ° ± 1 °) can be adjusted
18. Jet distance: 10-500mm (adjustable)
19. Inner diameter of spray gun: 30.0 ± 0.5mm or 52.6 ± 0.75mm
20, sample size: 80× 80mm or 200 × 100mm
21. Test temperature: -20 ± 2 ℃, 22 ± 5 ℃ (room temperature)