Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
Martin Dier wear -resistant test machine working principle:
The circular sample installed in the Martin Dell -resistant test fiber, Under the specified load, the plane movement and abrasives of Lissajous graphics are rubbed by the trajectory. The sample fixture can rotate freely around it with horizontal vertical axis. Determine the wear resistance of the fabric according to the total friction of the sample.
Martin Dells wear -resistant test machine Test results:
Determine each test The total number of frictions when damage occurs in the sample, and the number of friction accumulated before the sample is damaged as the number of wear -resistant times. If necessary, calculate the average and average confidence interval of the number of wear -resistant times.If necessary, follow the GB250 to evaluate the color change of the sample friction area.
Note: See IOS 6379 about the statistics of textiles or textiles.
The test report should include the following content:
1. The standard number of this part;
2. Description of the sample;
3. The friction load or nominal pressure used in the test;
4. The description of the abrasive used;5. Pre -processing of the sample;
6. The results of the combined judgment, for example:
- The average number of abrasion -resistant times (reported separately from the local organization and the flowering organization);
- The average value interval;
mdash;mdash; Whether the color change evaluation is made
7. Detailed deviation from the details of this program; 8. Use
Martin Dells wear -resistant testing machine for testtest date.
Product introduction:
IOS 4802, ASTM D4966 and other test standards
Martin Del wear -resistant test machine Working principle:
Under the prescribed pressure, the circular testThe trajectory of the Lissajous graphic and rubbing the friction certainly, certain frictions certainly After the number of times, check the abrasion resistance of the sample. 
Martin Dells wear -resistant test machine Instrument parameters: Testing station: 4 groups
Dynamics of wear resistance: 60.5 plusmn; 0.5mm
Test speed: outer wheel: 47.5 plusmn; 2.5 2.5 R/min, inner wheel: 44.5 plusmn; 2.4r/min
Control control Device:
PLC touch screen control
Volume (wxdxh): 71x55x37cm Weight (about): asymp;50kg
Power: 1∮ AC 220V 3A
Consumption: Dedicated to satisfy EN 16094 Austnes special consumable (8 tablets randomly attached)
