Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
Dipping strength Peel Streadth: The rate of adhesive bands of the unit width peeled from the specific adhesive surface. Unit N/CM.
Sample: Paste the tested adhesive band and paste the composition formed behind the steel plate.
Surface average roughness: Average bias of arithmetic of roughness contour. That is, the rough outline of the sampling length is an arithmetic average of the absolute value of the values.
Dipping intensity test machine Working principle: This standard method specifies the need to remove a glue belt from stainless steel at 180 ° C. Test method.
Stick a adhesive belt on the stainless steel plate, and fix the stainless steel plate on one class of the tension test machine. The stainless steel plate is 180 ° to open the adhesive band at a specified rate.
The divestickness required for the force measurement required by continuously peeling from the stainless steel plate to the peeling strength. Pay attention to the direction of the line perpendicular to the line.
The test report should include the following information:
1. Refer to the name and number of the standard;
2. Explain the differences in the method and prescribed method of this time;3. Make a test adhesive tape for each volume;
4 . The abnormal phenomenon during the test (such as adhesive layer transfer);
5.
6. Sample placement time;
7. Non -24mm sample width;
8. Non -(23 lys 1) C, relative humidity is a standard test condition with (50 士 5) %.
1. Product introduction:
Touch screen desktop tension test machine is a simple tension test machine, also known as Dipping strength test machine , simple structure and convenient operation, can be placed on the workbench for testing. It adopts a touch -screen control departmentThe unity is rotated by the driver's motor, and then the driver driver roller screw rod is driven by the transmission mechanical mechanism to drive up and decreased to complete the stretching or compression test of the sample. The force value is displayed by the sensor output, the feedback display, the test speed and the force value change curve can be displayed in real time.
It is simple and convenient to operate, especially suitable for testing instruments to control the quality of product quality on the production line. This machine can be equipped with various fixtures to achieve different test needs, suitable for textiles, film, electronics, metals, plastic, rubber, textiles, synthetic chemical products, wire and cables, leather and other industries.
2. Specification parameters:
1. Capacity: choose to choose within 1-200kg. 2, accuracy level: The display ± 0.5%(5%-100%of the full range) level 0.5
3, resolution: 1/50000
4. Power system: Step motor+drive
5. Control system: TM2101-5-inch color touch screen control ( Can be added to the connection computer function)6. Data sampling frequency: 200Times/SEC
7. Itinerary: 600mm
8. Test width: about 100mm
9. Speed range: 1 ～ 500mm/min
10. 10. Safety device: overload, emergency shutdown device, up and down stroke limited device, leakage protection device
11 , printer: automatic printing form (Chinese) Free point value, breakpoint ratio, date)
12, fixture: a set of stretch fixtures
13, host size: 450: 450 × 450 × 1420mm (length × width × height)
14. Host weight: (about) 45kg 
15. The rated voltage: AC: AC: AC: AC ~ 220v50Hz
