Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
IOS 1040 method can be used for research The stretching performance of the sample and the stretching stress/strain relationship of stretching stress/strain in other aspects of stretching strength, stretching volume, and other aspects of stretching strength.
The method in the IOS 1040 standard is applicable to the following materials:
- —The hard and semi -hard thermoplastic molding, squeezing and casting materials, in addition to the non -filled type, also include filling and enhanced mixture, hard and semi -hard thermoplastic sheets and films;
-The hard and semi -hard thermosetry molding material, including filling and enhanced composite materials, hard and semi -hard thermosettic plates, including layer pressure plates;
—— The fiber enhanced fibrous and thermoplastic composite materials that mix or have no fixed orientation of the material.
—— Thermal LCD polymer.
Picking requirements: The fixture is used to hold the sample to connect to the test machine connected to the test machine connected to the test machine The main axis direction of the sample coincides with the tension direction of the center line of the fixture. The sample should be clamped in this way to prevent the tested sample from sliding. The fixture does not cause the sample of the fixture at the premature destruction or squeezing the sample in the fixture.
For example, in the measurement of the stretch modulus, the constant of the strain rate is very important. It cannot be changed due to the movement of the fixture, especially when using a wedge fixture.
The fixture of the single -pillar tension test machine can also be specially customized according to the type of the test material.
1. Introduction
Single -pillar tension test machine
Also known as universal material test machine, tensile strength test machine, peeling strength test machine and metal tension machine, suitable for rubber, plastic, aluminum -plastic pipes, composite materials, waterproof materials, preventive objects, yarn, fiber, wire, wires, wires, wires Cables, paper, spring, wood, packaging materials, tape and other materials stretch, compress, bend, cut, tear, peeling and other mechanical properties of mechanical properties can be stretched. Closed -loop test, can also complete test items such as twisting and cups after configuring special devices.PullThe force test machine system is suitable for determining the mechanical properties and related physical parameters in stretching, compression, bending, cutting, tearing, peeling, puncture and other states.Tests and data can be tested and provided according to international standards such as GB, ISO, DIN, ASTM, JIS.
Equipment Super Function Features:
Limited Inspection The instrument works normally within the set the itinerary; overload protection: when the load reaches 110%of the power sensor, the instrument is automatically stopped;
Automatic diagnosis: regular measurement system, driving system for the driving system Examination of over pressure, overcurrent, ultra -temperature, and abnormal conditions occur immediately.
★ Resistance: 1/400,000, sampling frequency 400 times/s;
★ Power precision: ± 0.1%(20 to 100%fs) of the value of the value;
★ displacement resolution: optoelectronic encoder, which can reach 0.001mm;
★ Fast accuracy: Show show Within ± 1%;
★ Single test, manual 10 points of statistics, and automatically calculate the average value, break the fracture value;
★ Adaptable to multiple grating coders, pulse number range: 100 ~ 65535;
★
Single -pillar tensile test machine
Automatic return function;
