Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
1. Significance and use
1. This is a sensitive, non -contact and non -destructive method, which is used to measure the thickness of metal and some non -metallic coatings (in some cases, coating components), the coating component), and The thickness range ranges from 0.01 microns to 75 microns, depending on coating and base materials. It can be used to measure the coating and alkali combination that is not easy to measure through other technologies.
2. The thickness of the coating is an important factor in using the performance of the middle coating.
2. range
1. This test method includes the thickness of the metal and some non -metallic coatings using the X -ray spectrum method.
2. Given the large measurement thickness of the giving coating is thickness, exceeding the thickness, and the strength of the second x radiation from the coating or substrate is no longer tiny Change sensitive.
3. This test method measures the coating quality of each unit area. If the density of the coating is known, it can also be represented by a linear thickness unit.
4. This test method does not include the problems issued by radiation or radioactive homogeneous sources from the X -ray tube. For information on this important aspect, refer to the existing documents of the National Radiation Protection and Surveying Commission, Federal Registration Office, Nuclear Management Committee, National Standards and Technology Research Institute (formerly National Standard Agency) Local code.
5. This standard has no intention to solve all the security issues related to it (if.) Users of this standard have responsibilities to establish appropriate security and healthy practices, and determine the applicability of restrictions on regulations before use.
X -ray fluorescent analysis thicknesses can provide: coating thickness and element analysis function, which not only excellent performance, but also preferential price. Analyze the thickness and element components of the plating layer at the same time. It only takes a few seconds to obtain accurate measurement results in non -breakdown, and the thickness measurement of the multi -layer coating can also be competent. The lightweight sample room is suitable for different samples of different sizes. It is practical and highly accurate. It is the primary choice for hardware plating, jewelry, terminals and other industries.
CUBE series can measure the thickness of various metals, alloy single layers and multi -layers, the content of metal ions in the electroplating fluid, and the content and content of alloy elements.
The characteristic characteristics of the ACZET series X -ray fluorescent analysis and measurement:
The ACZET series X -ray coating thickness measuring instrument is based on X -ray fluorescent technology . This technology has been confirmed and widely used. Under the circumstances, it provides an analysis of easy operation, fast and non -destructive analysis. It can analyze solids and liquids. The element A circumference includes 
TI22 to U92 from the element cycle table, and has a sample compartment of different sizes.
Product Function: 1. Use the X-ray fluorescent spectrum method to measure the metal coating and the thickness of the coverage. The measurement method meets the IOS 16921-2005 standard (equivalent to ISO3497: 2000, ASTM B568 and DIN50987).
1. The range of plating elements: titanium ～ uranium, containing common gold, nickel, copper, silver, tin, zinc, chromium, 钯, etc.2. Number of plating layers: as many as 5 layers.
3. Measurement point size: circular measurement point, diameter of about 0.2-0.8 mm.
4. Measurement time: Usually 35 seconds-180 seconds.
5. Sample 蕞 Large size: 330 x 200 x 170 mm (long x wide x height).
6. Measurement error: usually less than 5%, and the specific situation of the sample depends on the specific situation of the sample.
7. Testing thickness range: usually 0.01 microns to 30 microns, the sample composition and coating structure depends.
8. Measure 8 elements at the same time.
9. The qualitative identification material reaches 20 elements.
Product parameter:
X -ray light pipe Micro-focus, high performance, tungsten target, scorching size 0.2-0.8mm
· High voltage 50 kV (1.2 mAh) can be optimized according to software control control optimization optimizations can be optimized according to software control. · The detector high -resolution gas proportional detector
· The diameter of a single fixed permeability 0.3mm
· Sample Warehouse 330 X 200 X 170 mm
· Sample table manual Z -axis sample table
· Power 230VAC, 50 / 60Hz, 120W / 100W· Instrument size 350 x 420 x 310 mm
