Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
IOS 16578.1-2008 The subject is applicable. In the thin film and thin slices of soft and hard materials, the energy of the two pants leg deformation should not affect the energy consumed by the energy consumption of the tear when the test should not cause crispy destruction, or the material deformation caused by the irreversible and reflux of the material. This part is not applicable to the torn performance of foam slices and foam film.
Tension test machine Test steps:
Use IOS 6672--2001 The thickness of the measuring instrument measures the thickness of the sample, and for a very thin film or a varinry film, according to
IOS 20220-2006, the measurement thickness specified in the method.
1. When using the measurement instrument specified in IOS 6672-2001, measure the thickness of the sample at the top of the sample incision from the top to the other distance of the sample. Take its arithmetic average.
2. When measured by the method specified in the method specified in IOS20220-2006, the average thickness of the film sample should be taken as the thickness of the sample.
3. Adjust the starting distance between the two fixtures is 75 mm, install the two trousers legs of the sample, so that the main shaft of the sample is overlapped with the connection center of the fixture.
1. Introduction
Single -pillar tension test machine Also known as universal material test machine, tensile strength test machine, peeling strength test machine and metal tension machine, suitable for rubber, plastic, aluminum -plastic pipes, composite materials, waterproof materials, preventive objects, yarn, fiber, wire, wires, wires, wires Cables, paper, spring, wood, packaging materials, tape and other materials are stretched, compressed, curved, cut, tear, peeling and other mechanical properties. , Subconsciously, such as a multi -closed test, can also complete test items such as twisting and cups after the special device is configured. The tensile test machine system is suitable for determining mechanical properties and related physical parameters in stretching, compression, bending, shearing, tearing, peeling, puncture and other states.Tests and data can be tested and provided according to international standards such as GB, ISO, DIN, ASTM, JIS. 
Equipment super functional features:
Limited protection: The equipment has the protection of each mechanical bipolar protection in the device to ensure that the instrument work normally within the set itinerary;
overload protection: When the load reaches the 110%of the power sensor, the instrument is automatically stopped;
Automatic diagnosis: regular check system, driving system over pressure, overcurrent, over -temperature and other inspections, appearing appearAnomalous cases are stopped immediately.
Main specifications and technical parameters
★ Resistance: 1/400,000, sampling frequency 400 times/s;
★ Power precision: ± 0.1%(20 to 100%fs) of the value of the value;
★ displacement resolution: optoelectronic encoder, which can reach 0.001mm;
★ Fast accuracy: Show showWithin ± 1%;
★ Single test, manual 10 points of statistics, and automatically calculate the average value, break the fracture value;
★ Adaptable to multiple grating coders, pulse number range:100 ~ 65535;
★
Single -pillar tensile test machine Automatic return function;
