eKkTextile Testing Instruments, Testing Equipment Manufacturer
The characteristics of the characteristic method and detection and maintenance of Shanghai constant warm water bath pot eKkTextile Testing Instruments, Testing Equipment Manufacturer
eKkTextile Testing Instruments, Testing Equipment Manufacturer
eKkTextile Testing Instruments, Testing Equipment Manufacturer
1. Features:
1. U -shaped steel pipes for electric heating pipes, sintering magnesium oxide and magnesium oxide and Electric heating wire is made directly in the water. eKkTextile Testing Instruments, Testing Equipment Manufacturer
eKkTextile Testing Instruments, Testing Equipment Manufacturer
2. Thermal constant temperature controller,
The use of steel and brass pipes as sensitive components, installed under the barrier of the box, and directly immersed in the water to pass the heat and high sensitivity. 
eKkTextile Testing Instruments, Testing Equipment Manufacturer
3. The power switch is turned on, and the power indicator light is on indicating that the power supply is connected.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
4. When using, warm water must be added to shorten the heating time and save electricity. eKkTextile Testing Instruments, Testing Equipment Manufacturer
eKkTextile Testing Instruments, Testing Equipment Manufacturer
5. The scale of the constant temperature controller is only the temperature control indicator, not the temperature instruction scale.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
6. Set the instrument to the required temperature, and the heating indicator lights indicate that the power supply of the electric heating tube is connected to heating. When the temperature on the temperature surface reaches the required temperature, it will be a few minutes later. Available automatic constant temperature control.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
2. Detective and maintenance: eKkTextile Testing Instruments, Testing Equipment Manufacturer
eKkTextile Testing Instruments, Testing Equipment Manufacturer
1. Keep neatly neat inside and outside the box.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
2. Do not turn on the power before the water is not added to prevent the heat of the electric heating pipe from burning.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
3. The box shell must be effectively grounded. eKkTextile Testing Instruments, Testing Equipment Manufacturer
eKkTextile Testing Instruments, Testing Equipment Manufacturer
4. Do not disassemble the difference on the right side if necessary to be safe.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
5. The power supply should be turned off after use.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
6. If the constant temperature control fails, it means that the sensor on the controller fails, and it can be used after changing.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
7. If you find that the lights are not lit, first turn off the power supply, remove the plug and remove the plug -in board on the right side, such as the fuse or indicator light bulb damage, it can be replaced with the same specifications.
eKkTextile Testing Instruments, Testing Equipment Manufacturer
eKkTextile Testing Instruments, Testing Equipment Manufacturer
