Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
high, low temperature Detailed detailed description of the humidity system of the damp -heat test box
The humidity system of high and low temperature intercourse changes to the humid heat test box
High and low temperature intercourse damp -heat test box as the name suggests for high temperature, low temperature, cross -change, damp heat test. Then, the humidity system is one of the systems. In order to achieve the test conditions, it is also inevitable to humidify and dehumidify the test box. High and low temperature test box, constant temperature and humidity test box, salt fog corrosion test box
The new generation of temperature and humidity test boxes The humidification method has been upgraded to shallow slot humidification, and the boiler was used to humidify. The shallow slot humidification speed is significantly faster than the boiler humidification and the stable effect is better. It is more suitable for long -term temperature and humidity tests. However, the shallow slot humidifice the area is large, not suitable for small equipment, and small devices can only be connected. Therefore, in order to be beautiful, it is necessary to use boiler -type humidification, and both have advantages. It mainly depends on the size of the equipment selected by the user. Dipidum dehumidification, we use a wave pattern fin tube heat exchanger (as well as a dehumidifier), and uses the evaporator disc dew point temperature layer of the dewen to contact the dehumidification method. This dehumidification method has the advantages of stable humidity and fast dehumidification speed. High and low temperature test box, constant temperature and humidity test box, salt fog corrosion test box
High and low temperature intercourse damp heat -changing test box The humidity system box has the above advantages than the previous equipment. If you have technical problems, please consult our technology department at any time.
The humidity system of the high and low temperature and humidity test box of high and low temperature and humidity test box, detailed high and low temperature test box, constant temperature and humidity test box, Salt Mist Corrosion Test Box
Able to program high and low temperature and humidity change test machine itself. Place it on the first floor and use a manual hydraulic forklift to directly remove it and promote the laboratory. If the test box is placed upstairs, you should focus on whether there is a wide range of elevators, elevators, and the aisle, corridor, corridor, and the need to pass the laboratory, corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor, and the corridor. Whether the door can enter smoothly, if there is no elevator to move manually, you should pay special attention. High and low temperature test box, constant temperature and humidity test box, salt mist corrosion test box
12 If the site problem can be programmed high, low, temperature, humidity and heat intercourse, the test machine must be carried up by manual transportation, the following points need to be noted:
1. The standard size of programmable height and humidity intercourse test machines is divided into five types: 5, 225, 504, 800, 010
, and the low temperature range is 0, -20, -40 , -60, -70, -80, what needs to be stated here is that when the size of the test box exceeds 504 liters and the temperature range exceeds -60 degrees, we are not recommended to use handling, because the weight and volume are too large, which may cause personnel and personnel to be personnel and the person and the volume. The damage and major safety hazards of the machine can use cranes, replace places or replace the size. High and low temperature test box, constant temperature and humidity test box, salt mist corrosion test box
Within the scope of handling, the manufacturer recommends finding a professional moving company and a manufacturer technician to guide at the scene to prepare complete tools. The entrance of the corridor has sufficient space and the average force of the transport staff to correctly move under the guidance of the technician.
3, because the programm can use compressor refrigerant to refrigerate, so in the transportation process, so in the transportation process It must not be tilted (if the angle of the tilt cannot exceed 15 degrees in special circumstances), it should be moved vertically and parallel like a handling air conditioner to avoid the unable to refrigerate by the fluoron leak.
4. The outer biliary of the test box is treated with steel plate anti -static spray plastic. The related parts are made of stainless steel. Therefore, avoid impact, bump, scraping scraping during the handling, so as not to affect the aesthetics of the machine (if there is scratches or paint on the surface of the test box, you need to reintegrate the entire test box shell. The large cost of the project is very high). Essence
5. The hinge of the gate needs to be paid attention to avoid loosening the door or unstable center of gravity.
6. If it is a test box with humidity, beware of the water bass cup.
Tortor When the volume, temperature range, and test function of the box, not only the functions that the samples need to be realized, but also the facilities of forklifts, elevators, aisles, corridors, doors, windows, etc.Whether it can make a programmable height, temperature and humidity intercourse, the test machine is unimpeded into the test area.
Specializing in the production of programmable high -low temperature and humid heating test machine temperature impact test box non -standard temperature impact test box and other testsEquipment, has many years of production experience.Professional production environment test equipment.
