Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
1. Before the use of the instrument, the control switches should be in a non -working state, and the speed adjustment knob should be placed at the minimum position;
2. The instrument should be placed on a flat ground, the environment should be neat, dry and ventilated;
3. Need to meet the standards to avoid damage to the instrument;
4. After the refrigeration system stops working, wipe the working cavity and glass observation with a soft cloth. Window;
5. Keep the air in the cultivation box clean and disinfect regularly;
6. Do not adjust the flowing gas pressure to too large, so as not to break through the pipeline and damage detector;
7. During the continuous work, the instrument should do regular inspections every three months; check whether there are water droplets, dirt, etc. fall into the motor and exposed refrigeration elements; clean up the compressor, the condenser on the condenser Dust and dirt; check the fuse, control components and fasteners;
8. Frequently pay attention to distilled water in the distilled water tank in the box In order to keep the box in the box 
relative humidity, avoid evaporation of the cultivation liquid;
9. Close the training box well The door is to avoid gas leakage and affect the test effect;
10. Before the downtime, each control switch should be in non -working work. Only cut off the power of the state;
11. Not applicable to it with volatile chemical solvents, low concentration explosion gases and low fire dot gases Cultivation of items and toxic items.
12. Pay attention to the maintenance of the instrument to make it in a good working state, Can extend the life of the instrument;
13. After long -term use of the instrument, natural wear is normal, and the manufacturer should be contacted for maintenanceEssence
