Fabric Perspiration Tester

info@qinsun-lab.com Get Quote

The fabric perspiration stain tester is widely used in determining the color fastness to perspiration, sea water, saliva, distilled water and in textiles. The colored textile specimen is wet out using a simulated acid perspiration solution or others, and placed in contact with a multi-fiber strip.

Extrusion to remove excess liquid of the combination, then subjected to a fixed mechanical pressure for a pre-determined period. Following incubation, the Perspirometer is removed and specimens and multi-fiber strip are observed the charge of color after drying respectively.

Fabric Perspiration Tester Technical Parameters:

A.Provided with a stainless steel frame, 2 loading weights and 21 acrylic separator plates.

B.A stainless steel frame with a capacity of 20 samples of 10cmtimes;4 cm.

C.Each sample held between acrylic separator plates.

D.Different weights shown with the corresponding test standards to avoid errors.

Provided with stainless steel frame with a capacity of 20 samples held between acrylic separator plates.Loading weights for AATCC, ISO and BS standards are included.Use with Perspirometer Kit and Set of chemicals for AATCC and ISO perspiration tests, consisting of : 500g Sodium Chloride, 500g Sodium Dihydrogen Orthophosphate 2H2O, 500g Di-Sodium Hydrogen Orthophosphate 2H2O, 200g L-Histidine Monohydrochloride.

Testing Standards:

ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, Mamp;S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, IOS 3992/5713/5714

Applications:

The Perspiration Tester is designed for color fastness test to perspiration, sea water, saliva, distilled water and in colored textiles.