A flue gas analyzer is a device that uses electrochemical sensors to continuously analyze and measure the levels of flue gases such as CO2, CO, NOx, SO2, etc. It is mainly used for handheld use in pollutant discharge of small fuel oil and gas boilers or for environmental monitoring near pollutant sources.
Measuring principle: capacitive;
Display mode: 4-digit bright LED display, display resolution 0.1%;
Measuring range: volume moisture: 0~40.0% VOL, relative humidity 0~100% RH (please only one mode can be displayed at a time
Measurement Accuracy: ±1.5%FS;
Response Time: T9015S;
Analog Output: 4-20mA. DC (non-isolated output, load resistance less than 500 ohms), 2 programmable dry contacts. Type passive alarm output, contact capacity 220VAC/2A,
Other ScInterface: RS232 (default) or RS485;
Sampling method: on-site
Sample gas composition: no flammable gas, no highly corrosive gas;
Protection: probe rod is 316F, instrument body body protection grade IP65;
Working temperature: instrument: -10℃~+50℃, probe rod 0~170℃;
Power supply: AC220V 50/60Hz;
Service life: instrument 36 months, sensor 24 months (under normal usage conditions);
Probe Length: Conventional 0.5m, 1.0m, 1.5m, other lengths can be customized (1.8m);
Installation method: plug-in type, DN65 standard flange
Installation instrument features: integrated design, easy installation, reduce the influence of external interference on the reading;
Original imported sensors can effectively guarantee the accuracy and life of the instrument;
High-precision temperature automatic compensation, making the eggEffect of ambient temperature is eliminated;
Can add advanced functions to measure dew point values at high temperatures;
Two-stage filter design, effectively filters dust and acidic liquids;
The probe rod is made of 316F material, which has corrosion resistance;
The instrument case protects the body IP65 protection level; simple operation, long service life, easy maintenance; can provide two display results for bulk humidity or relative humidity.
Widely used in continuous online flue gas monitoring system CEMS to measure humidity of desulfurization plants, ultra-low emissions, VOC and other occasions, and can also be used in wood and building materials, paper, chemical, pharmaceutical, tobacco, printing and dyeing and other moisture control occasions.
Notes: Bei low temperature, high temperature and high dust environments.