Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
The Smoke Moisture Velocity Detector (hereinafter referred to as the detector) is a moisture detection instrument that uses the moisture-sensitive capacitance method to measure the moisture content in the smoke gas. The instrument uses imported sensors and comes with temperature and pressure compensation correction. With the advantages of high measurement accuracy, corrosion resistance and wide operating temperature range, it is widely used in flue gas moisture measurement of boilers, furnaces and various flue gas ducts.
Technical parameters:
Measurement principle: dry and wet oxygen (ceramic detects moisture);
Display method : 4-digit bright LED display, display resolution 0.1;
Measuring range: 0 ~ 40% VOL;
Resolution: 0.01% ;
Measurement Accuracy: ±1.5%FS;
Repeatability: ±1%;
Response time : T9020S;
Analog output: 4-20mA.DC (non-isolated output, load resistance less than 500 ohms);
0 -5 V DC (non-isolated output, load resistance greater than 10 kohms);
1 channel programmable passive alarm output with dry contact, contact capacity 220 VAC/2 A;
Working Temperature: Instrument: -10~+50℃, Probe: Conventional Type: 0~350℃; /p
High Temperature Type: 0~500℃;
Special type: 0~650 °C;
Sampling method: Inline;
Power supply: AC220V 50/ 60Hz;
Protection: 316F probe rod, instrument case protection class IP65;
Lifetime: instrument 48 months, sensor 36 months (under normal usage conditions);
Probe length: conventional 1 m (the introduction). Length can be customized);
Installation method: plug-in type, DN65 standard flange
Product features: integrated design, easy installation, reducing the influence of external interference on the measured value;
The original imported sensor can be used for a long period of time in a high temperature environment within 650°C;
High precision, automatic temperature compensation to eliminate the influence of ambient temperature;
Two-stage dust filter design, effectively filter dust;
Probe rod 316F material , Corrosion resistance Strong;
The protection grade of the instrument shell is IP65,Suitable for outdoor use in bad weather;
Easy operation, long service life and easy maintenance;
Users can set 4-20mA or 0-20mA freely. 5V output According to the upper and lower limit of humidity, users can get higher precision analog output.
Application: Widely used in the measurement of desulfurization and denitrification flue gas moisture in continuous online practiceMonitoring system CEMS for flue gases and can also be used in wood, building materials, paper, chemicals, measurement and control of humidity in pharmaceutical, fiber, textile, tobacco, vegetable and food processing.
Notes: If you encounter low temperature, high humidity and high dust environment, general dealers will provide you with a reasonable flue gas humidity solution.
