Weigh the hydrometer before the densitometer. Conceptually, density has a similar physical meaning to specific gravity, which describes the amount of matter contained in a unit volume of an object.
If the volume of an object is v, its mass is m, and the acceleration due to gravity is g (=0.98 m/s2), then the weight of that object is mg.
At this time, the density of the object is m/v and the specific gravity is mg/v. Apparently the numerical difference between density and specific gravity is only one gravitational acceleration g. Earlier we used the concept of specific gravity, we just used the concept of density.
Since objects have three basic forms: solid, gas and liquid, there are corresponding types of density meters. Liquid density meters are used to measure the density of liquids.
The liquid density meter uses the Prinzip of vibrating cylinder density sensor to test liquid density. After the liquid to be measured is pumped into the resonance cylinder sensor, the single-chip microcomputer takes over the measurement process, which is fast, direct and highly sensitive.
This density meter can be widely used to measure the density of various liquids, and with different concentration conversion software, it can also directly read the concentration or specific gravity of the corresponding liquid. B. alcohol, through the processing of single-chip software, the volume concentration data can be read out directly, and the test is more convenient.
Important installation points
The choice of installation environment:
1. The liquid density meter should be in a place without direct sunlight, vibration, wind, dust and magnetic field interference.
2. The ideal place to get upllen is a 20°C/68°F and 50% humidity environment.
3. Make sure the voltage used matches the voltage required by the liquid density meter.
Level Adjustment: Use the leveling feet to align the air bubble on the Lianyungang color wheel with the center of the Lianyungang color wheel, so that the whole machine is in a horizontal state.
Test bench installation: Place the test bench in the middle of the test board.
Installing the tank placement plate: Place the liquid placement plate in the two concave fixed grooves on the host.
Install the windshield and insert the liquid density meter into the windshield.
How it works
It's like squeezing a tube filled with liquid with your fingers, and the liquid in the tube moves vforward as the fingers slide forward. The peristaltic pump is also based on the same principle, except that the fingers are replaced by rollers.
Peristaltic pump features:
No pollution: the liquid only touches the pump tube, not the pump body
High precision: repeatability, high stability and precision
Low shear force: an ideal tool for transporting shear-sensitive and aggressive liquids
Good sealing: good self-priming ability, can be empty Rotation prevents backflow
Easy maintenance: no valves and seals
U-shaped surge tube method
The The square of the period of oscillation of the vibrating tube is proportional to the density of the liquid sample placed in the tube. The design principle of the U-shaped oscillating tube is based on this.