The traditional method for moisture determination is generally the oven drying method. Testing a sample takes two or three or even three or four hours. This involves taking the sample out of the oven every half hour and weighing it on a precision balance until the weight of the sample reaches twice the same. If there is another change, it means that the moisture has dried completely, and then the moisture value (moisture content) of the sample can be found by weighing it with a balance and calculating it manually.
The advantage of using the oven method to measure the moisture content of samples is that it is more accurate; the disadvantage is that it is inefficient and cannot meet the demands of fast-moving corporate production.
The halogen moisture analyzer uses a highly efficient drying heater - a great valuePowered ring halogen lamp to heat the sample quickly and evenly, and the moisture in the sample is continuously absorbed while drying.
Throughout the measurement process, the instrument automatically displays the measurement results in real time: sample weight, water content, solids content, measurement time, heating temperature, etc.
The fast moisture analyzer adopts the principle of the international kiln drying method, and the measurement results agree well with the moisture determination of the kiln method, but the working efficiency is much higher than that of the kiln method.
With a quick moisture analyzer, the general sample can be measured in just a few minutes, which is why it is favored and praised by the majority of users.
The halogen moisture analyzer is used in all industries where moisture needs to be determined quickly, as far as granular, powdery, flaky and nicvolatile liquids, such as: food, chemical industry, medicine, plastic raw materials, rubber, tobacco, tea, textile, meat, food, starch, feed, coal, molding sand, sewage sludge, dairy industry, etc. Moisture analyzer is the best choice for the Production process in companies and as a moisture meter in the laboratory.