Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
Fast Calcium Hydroxide Moisture Detector is specified in Aluminum Hydroxide, Magnesium Hydroxide, Aluminum Oxide, Gypsum Powder, Calcium Carbonate, Chemical Powder, Molding Sand, Foundry Sand, Iron Powder, Ceramic Powder, Barium Sulfate, and moisture detection from materials such as Kaolin, Fumed Silica (Silicon Dioxide), Nano -Calcium carbonate and heavy calcium.
Technical Parameters of Rapid Calcium Hydroxide Moisture Detector:
1. Weighing Range: 0-90g
SFY -Brand 8931081
Moisture measurement range: 0.01 - 100%
Dry weight measurement range: 100 - 0.00%
3. Minimum weighing value: 0.001 g
JQR weighing system sensor
CMC Metrology license no. 00000018 (Production License Certificate)
4. Sample mass: 0.5-90g
5. Heating temperature range: current ambient temperature -205℃
Temperature error: ±0.5℃
Heating method: trunk type mixed gas heating
6. Moisture content readability: 0.01%
Display of 8 parameters:
Moisture value, dry weight, initial sample value, final sample value, measurement time, Temperature initial value, final value, constant weight
Display: 7 inch color LCD touchscreen
Operating mode: full-screen touchscreen
Screen resolution: 800x480
8. Dimensions: 380×205×325(mm)
9. Power supply: 220V±10%
The working principle of the rapid calcium hydroxide moisture detector:
The liquid crystal touch screen calcium hydroxide moisture detector was developed by Shenzhen Guanya and produced by the WL company The series not only inherits the excellent performance of the previous Guanya devices, but also integrates more advanced technological highlights and realizes the design concept of high intelligence.
The display part of the device uses a large 7-inch high-resolution LCD screen,and the test parameters and condition settings can be done through the full screen directly on the LCD screen. Screen touch mode to realize Man-machine integration operation mode has been changed, and the disadvantage that the moisture meter cannot observe the data process changes in real time has been changed. After the analysis is completed, the instrument screen will automatically lock the final data. No staff is required to supervise and maintain the experimental process.
Operators do not need to be trained, by reading the manual or the product operation process, they can fully grasp and operate the operation, and at the same time, according to the instructions in the manual, just handle the Problems that arise during the operation of the equipmentvarious phenomena.
The Calcium Hydroxide Moisture Detector offers an imported automatics weighing display system, a humanized system operation, an automatic calibration function, an automatic test mode, sampling, drying and measurement in one machine.
Strain-type mixed gas heater, achieves the heating power in a short time, the sample is quickly dried at high temperature, high measurement accuracy, short time, no consumables, simple operation, not affected by the environment, time drift , Temperature drift factors, no need for auxiliary equipment and other advantages.
