Welcome to Qinsun Instruments Co., Limited.
2023-05-23 0 Views

Servicing and maintenance of precision image measuring devices

For measuring instruments, regular and good maintenance and care, and keeping the instrument in good condition can not only maintain the original accuracy of the instrument, but also extend the use and life of the instrument. aHsTextile Testing Instruments, Testing Equipment Manufacturer


Share the maintenance method of the precision image measurement device. In order to reduce the number of failures of the precision image measuring device, we should do a good job in maintenance. aHsTextile Testing Instruments, Testing Equipment Manufacturer


1. The instrument should be placed in a clean and dry room (room temperature 20°C ± 5°C, humidity below 60%) to avoid surface contamination of optical parts and rusting metal parts and dust. Objects fall into the moving guide rail and affect the performance of the instrument. aHsTextile Testing Instruments, Testing Equipment Manufacturer


2. After using the instrument, the work surface should be wiped clean at any time and then covered with a dust cover.


3. The transmission mechanism and movement guide rail of the instrument should be lubricated regularly to ensure smooth movement of the mechanism and to maintain good working condition. aHsTextile Testing Instruments, Testing Equipment Manufacturer


4. If the glass and painted surfaces of the workbench are dirty, they can be wiped with neutral detergent and water. Never wipe the painted surface with organic solvents, otherwise the painted surface will lose its luster. aHsTextile Testing Instruments, Testing Equipment Manufacturer


5. The instrument's LED light source has a long service life, but if a bulb burns out, please notify the manufacturer and the staff will replace it for you. aHsTextile Testing Instruments, Testing Equipment Manufacturer


6. The precision components of the instrument, such as the imaging system, workbench, optical ruler and Z-axis transmission mechanism, etc. need to be fine-tuned. All adjustment screws and mounting screws have beenrepaired. Customers please do not disassemble it by yourself. If there is any problem, please notify the manufacturer to solve the problem. aHsTextile Testing Instruments, Testing Equipment Manufacturer


7. The software has corrected the error between the workbench and the optical ruler. Please do not change it yourself. Otherwise, incorrect measurement results will occur. aHsTextile Testing Instruments, Testing Equipment Manufacturer


8. In general, do not unplug all electrical connections from the instrument. If they were pulled out, you need to put them back in correctly according to the mark and tighten the screws. Improper connection at least impairs the function of the instrument and in the worst case can lead to damage to the system. aHsTextile Testing Instruments, Testing Equipment Manufacturer


Common errors and causes of errors in precision image measuring devicesaHsTextile Testing Instruments, Testing Equipment Manufacturer


1) Blue screen;aHsTextile Testing Instruments, Testing Equipment Manufacturer


2) Host Poor contact using the grid ruler and the data conversion box results in no data being displayed;aHsTextile Testing Instruments, Testing Equipment Manufacturer


3) Transmission and surfaceen light sources are not bright;aHsTextile Testing Instruments, Testing Equipment Manufacturer


4 ) Two-dimensional printing Not open;aHsTextile Testing Instruments, Testing Equipment Manufacturer


5) The automatic image measuring device cannot find the origin or cannot turn on move. aHsTextile Testing Instruments, Testing Equipment Manufacturer


Reasons for failureaHsTextile Testing Instruments, Testing Equipment Manufacturer


Due to the long repair time and high price, the main concern is to delay the customer's normal work. There are many reasons for the problem, but the reasons are as follows:aHsTextile Testing Instruments, Testing Equipment Manufacturer


1) The operating software file is lost or the CCD video cable is not in good contact;aHsTextile Testing Instruments, Testing Equipment Manufacturer


2 ) The grid ruler or data conversion box is damaged;aHsTextile Testing Instruments, Testing Equipment Manufacturer


3) The power board is damaged;aHsTextile Testing Instruments, Testing Equipment Manufacturer


4) Plus damages or crashes of the operating system of the software of the image measurement device. aHsTextile Testing Instruments, Testing Equipment Manufacturer


You may have just one of the above issues, or you may have multiple issues at the same time. aHsTextile Testing Instruments, Testing Equipment Manufacturer

aHsTextile Testing Instruments, Testing Equipment Manufacturer