The oil filter is suitable for the processing of transformer oil, steam turbine oil (turbine oil), lubricating oil, hydraulic oil, etc. Dehydration, degassing, removal of impurities, purification of acid and alkali and waste oil regeneration in industrial oils such as oil, gear oil and anti-fuel oil. It is an ideal special equipment for cleaning oil.
The oil filter has a multi-stage vacuum spray thin film evaporator. As the treated oil passes through the evaporator, the water is quickly evaporated under high vacuum and then removed after condensation. The mechanical impurities and other insoluble oil solids in the treated oil are blocked and removed by the micron-scale polymer filter membrane after coarse filtration, fine filtration and fine filtration.
According to the user's needs, the configuration of high-efficiency deacidifier can effectively adsorb remove the bad acid components in the oilnd be removed. The above principle shows that the linear physical process of oil purification through the oil filter does not require the addition of chemical substances, and will not cause secondary pollution and additional damage to the oil.
When the oil filter works, the polluted oil is removed through the coarse filter to remove larger particles of mechanical impurities and enters the electric heater. After that, the emulsion oil is heated to a certain temperature , the viscosity of the oil decreases, which has a positive effect on the coalescence and settling of water droplets.
The hot oil is distributed through the cyclone into the oil-water separation tower, and the finely distributed milky water droplets in the oil gradually collect to form larger and larger water droplets. Under the joint action Due to the tension and gravity of the oil film, the water droplets in the oil will merge and settle in the lower water reservoirtank up. The oil, which removes a large amount of water, enters the vacuum tank after precision filtration, and the oil flows through the inside and outside layer by layer to the surface of the reaction ring and evaporates into a thin film.
After the vacuum deep separation of the residual water in the oil, the oil can also be discharged into the regeneration tank to regenerate the deteriorated oil and remove acidity, soap, pigments, etc.
The oil filter unit consists of a filter system, a regeneration system, a heating system, a vacuum system, an automatic control, a protection system, a cooling system, etc. Due to the different requirements of manufacturers, the oil filter can also be equipped with a acid removal and discoloration adsorption device can be equipped.
Advantage 1: One machine with multiple functions and complete functions. That is, it can be dehydrated, degassed, three sets of (coarse, medium, fine) filters, adsorption and regeneration, and can also provide vacuum dewatering and degassing, filter out impurities and perform regeneration adsorption functions.
Advantage 2: Safe and reliable. Pressure, temperature and liquid level have clear data display and mechanical automatic control. Efficient, economical and low running costs. It is the device with complete functions and advanced performance among similar oil treatment products.
Advantage 3: Reasonable design structure. Easy to use on the go or online.