Analysis of the maintenance of the clean cabinet

Introduction to the cleaning benchBNDTextile Testing Instruments, Testing Equipment Manufacturer

Partly clean working environment and extremely versatile cleaning equipment. It is widely used in various industrial fields such as electronics, national defense, food processing and biology, and is also loved by many factories. BNDTextile Testing Instruments, Testing Equipment Manufacturer

Maintenance of the cleaning workbench mainly includes the following aspects: BNDTextile Testing Instruments, Testing Equipment Manufacturer

1. When using the workbench, first wipe the table with gauze soaked in cleaning ab solution, and then wipe and disinfect with a disinfectant.
2. Turn on the power, turn on the ultraviolet light for disinfection 50 minutes in advance, and treat and clean the microorganisms accumulated on the surface of the workbench in the work area. After 30 minutes, turn off the UV light and turn on the blower.
3. Do not store unnecessary items on the work surface to avoid themaintain undisturbed clean airflow in the work area.
4. When the process is complete, clean the work surface, collect all debris, turn off the fan and light switch, and wipe and disinfect with detergent and disinfectant.
5. Turn on the UV lamp on the workbench, and after 30 minutes of disinfection, turn off the UV lamp and cut off the power.
6. It should be placed in a place with good sanitary conditions, easy to clean, and the doors and windows can be sealed to avoid the influence of polluted outdoor air on the room .
7. The location should be far away from places with vibration and noise.
8. It is strictly forbidden to put it in a place that will generate large dust particles and large airflow to ensure normal air movement in the control area. BNDTextile Testing Instruments, Testing Equipment Manufacturer

Structural features of the cleaning workbenchBNDTextile Testing Instruments, Testing Equipment Manufacturer

It consists of a box body, a fan, a high-efficiency filter, an operation switch and other components. The cabinet is made of heat sink, the surface is plastic sprayed, and the work surface is made of stainless steel. By adjusting the working state of the fan, the average wind speed is kept within the rated range, which effectively extends the life of the filter. BNDTextile Testing Instruments, Testing Equipment Manufacturer

BNDTextile Testing Instruments, Testing Equipment Manufacturer