Welcome to Qinsun Instruments Co., Limited.
2023-05-17 0 Views

Analysis of the maintenance of the high and low temperature test chamber studio

The high and low temperature test chamber is mainly composed of a personal studio and a control cabinet. wM6Textile Testing Instruments, Testing Equipment Manufacturer


This article describes the daily maintenance methods of high and low temperature test chambers and control cabinets. Daily maintenance can effectively improve the accuracy of experiments and the life of equipment. wM6Textile Testing Instruments, Testing Equipment Manufacturer


1. Cleaning the personal studio of the high and low temperature test chamber: wM6Textile Testing Instruments, Testing Equipment Manufacturer


The stains in the experimental living area and the dirt from outsiders can cause the results of the affect experiments. Therefore, it is necessary to clean up the pilot area before the experiment. wM6Textile Testing Instruments, Testing Equipment Manufacturer


Cleaning the pilot area: wM6Textile Testing Instruments, Testing Equipment Manufacturer


a. Open the door. wM6Textile Testing Instruments, Testing Equipment Manufacturer


b. Clean the inner wall of the box, the hanging rails and other places with a thin cloth. wM6Textile Testing Instruments, Testing Equipment Manufacturer


c. Close the door. wM6Textile Testing Instruments, Testing Equipment Manufacturer


2. Cleaning the high and low temperature distribution boxture test boxwM6Textile Testing Instruments, Testing Equipment Manufacturer


The accumulation of airborne dust in the junction box will lead to redundant connection errors. Therefore, the junction box must be cleaned quarterly. wM6Textile Testing Instruments, Testing Equipment Manufacturer


Junction box cleaning process: wM6Textile Testing Instruments, Testing Equipment Manufacturer


a. Turn off the main switch (earth leakage circuit breaker);wM6Textile Testing Instruments, Testing Equipment Manufacturer

b. Open the back cover of the power distribution box;
c. Use a vacuum cleaner or compressed air paint spray gun (compressed air for dry cleaning) to clean the power distribution box. wM6Textile Testing Instruments, Testing Equipment Manufacturer


Follow the cleaning order from top to bottom to avoid repeated cleaning. Be careful not to pull the wires hard when cleaning, so as not to accidentally change the route or pipeline, causing damage and additional inconvenience. wM6Textile Testing Instruments, Testing Equipment Manufacturer

wM6Textile Testing Instruments, Testing Equipment Manufacturer