Welcome to Qinsun Instruments Co., Limited.
2023-05-12 0 Views

Shanghai Qianshi analyzes the main points of using the constant temperature incubator

Constant-temperature incubators are widely used experimental devices with the advantages of stable performance, flexible usage and high reliability. They can be used for culturing and growing bacteria in scientific research departments such as medicine and health, pharmaceutical industry, biochemistry, industrial production and agricultural science. , fermentation and other constant temperature tests. Today we mainly introduce the operation and key points of constant temperature incubator, hope to help everyone.

Constant temperature incubator operating mode:4x8Textile Testing Instruments, Testing Equipment Manufacturer

1. Turn on the power, press the power button, and the power indicator light will be on. 4x8Textile Testing Instruments, Testing Equipment Manufacturer

2. Operators must read the instructions carefully, understand and become familiar with the functions of the incubator before turning on the power. 4x8Textile Testing Instruments, Testing Equipment Manufacturer

3. When the temperature displayed in the incubator is the sette temperature is reached, the heating is interrupted and the heating control lamp goes out. After 90 minutes power on at the standard ambient temperature, the temperature can be kept stable. When the current temperature in the incubator exceeds the set temperature. Set the upper alarm temperature (the factory setting is 5℃), the temperature controller temperature tracking alarm indicator light will be on, and the heater power supply will be automatically cut off at the same time. 4x8Textile Testing Instruments, Testing Equipment Manufacturer

4. Set the temperature controller to the user's desired setpoint temperature value (this value must be greater than the room temperature plus 50°C). 4x8Textile Testing Instruments, Testing Equipment Manufacturer

5. When the glass door is opened to take samples, the heater and circulation fan stop working. After closing the glass door, the heater and fan can work normally, which can avoid contamination of the samples culture and the temperature overheating. Shock phenomenon4x8Textile Testing Instruments, Testing Equipment Manufacturer

Important points for using the constant temperature incubator:4x8Textile Testing Instruments, Testing Equipment Manufacturer

1. The product and the data set have been strictly tested before leaving the factory, through the temperature controller menu should not be changed at will . 4x8Textile Testing Instruments, Testing Equipment Manufacturer

2. The device should not be used under high voltage, high current and magnetic field conditions, so as not to affect the temperature controller and avoid the risk of electric shock. 4x8Textile Testing Instruments, Testing Equipment Manufacturer

3. The incubator chassis must be properly grounded for safe use. 4x8Textile Testing Instruments, Testing Equipment Manufacturer

4. Do not place flammable and explosive objects for heating to prevent danger. 4x8Textile Testing Instruments, Testing Equipment Manufacturer

5. Electroplated parts and surface paint should be kept clean regularly. If not used for a long time, neutral grease or petroleum jelly should be applied to the electroplated parts to prevent corrosion, and a plastic film should be attachedcover outside the incubator to avoid dust. Place the incubator in a dry room with a hood to prevent moisture from damaging the temperature controller. 4x8Textile Testing Instruments, Testing Equipment Manufacturer

6. Do not place objects with high acid and alkali content to prevent cabinet corrosion. 4x8Textile Testing Instruments, Testing Equipment Manufacturer

4x8Textile Testing Instruments, Testing Equipment Manufacturer