The high and low temperature humidity and heat test chamber can be used for various temperature and humidity tests of pharmaceuticals, textiles, food processing, biotechnology and industrial products, and can simulate high temperature and high humidity/high temperature low humidity/low Temperature and high humidity/high temperature/low temperature, etc. Different environmental conditions, widely adapted to industrial electronics, military, plastic, hardware, chemical and other industries.
1. The basic steps for the correct use and life extension are as follows:
1. Cleaning and maintenance of the inside and outside of the high and low temperature, humidity and Heat test chamber (a, the water in the protective bucket, approx. Clean once after three tests. b. Clean the box once after the test. You can use banana water for cleaning orhe wash clean. c. Clean the power distribution room at least once a year. When cleaning, you can clean manually or use a vacuum cleaner to vacuum. Exception. i.e. The outside of the box needs to be cleaned more than once a year. For cleaning, washing powder and banana water can be used is not suitable.
The dust in the condenser of the constant temperature and humidity test box needs to be removed, and the condenser should be cleaned regularly. Monthly maintenance.
2. The protection functions of the unit are as follows:
1. Error display and controller setting error warning
2. Refrigeration compressor overload protection3. System over-current protection device
4. Over-temperature, water shut-off and over-heat protection switch
5. System control circuit fuse
p> 6. Fault indicator light
7. Without circuit breaker