Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
Tensile testing machine is a high-tech integration testing equipment, the equipment is more expensive, good maintenance and maintenance are positive, to ensure the normal operation of the tensile testing machine and extend the service life of the equipment. So How is the tensile testing machine maintained?
1. When painting, pay attention to parts susceptible to rust or accessories that have not been used for a long time B. Fasteners, bolts, etc. Apply anti-rust oil. The jaws of the bracket or the relatively sliding surface of the bracket should be kept clean to avoid impact. After preparing a series of samples, the slags and the like left in the jaws should be removednd deposits are cleaned in good time. If the tooth shape of the jaws is blocked, please use a steel brush dipped in gasoline to clean them, and avoid using sharp and hard tools for cleaning.
2. Usually pay attention to cleaning Test Keep the test machine and computer in the working environment clean and sanitary. Especially the tensile testing machine equipped with special devices such as hydraulic devices and pneumatic devices has relatively higher requirements for the testing environment.
3. Avoid high temperaturetures, moisture, dust and corrosion. Immersion of aggressive media, water, etc. in the machine or computer. Regular inspections to maintain integrity of parts and components.
4. Be sure to change the oil every 2500 hours for the main motor with the reduction gear. It is best to choose a high quality lubricating oil, which can extend the life of the main motor of the gear reducer.
5. The unit's ball screw requires cleaning and maintenance every six months. When cleaning, first use gasoline to scrub, and then apply grease.
6. It is highly recommended to add a regulated power supply when site conditions permit, especially if the device occasionally seems unusual.
If the maintenance work of the tensile testing machine is done well according to the above points, the service life of the tensile testing machine can be greatly extended, and the testing accuracy of the tensile testing machine can be maintained for a long time to a high standard.
