The appearance of the electronic universal testing machine is unrestricted>
Electronic Universal Tester Appearance is also very important, and the appearance can reflect the manufacturing stage of the manufacturer's instrument. The unqualified appearance of the electronic universal testing machine manifests itself primarily in the following aspects:
1. There are obvious projections, pits, roughness and other damages on the surface of the universal electronic testing machine. In generalSometimes it is caused by collision or impact during the manufacturer's production, or it may be caused by impact during transportation.
2. The color of the test machine color is uneven, dark or light, and the boundaries of different colors are not clear.
3. The screw holes on the joint surface of the universal electronic testing machine components are misplaced, and the cover plate is inconvenient to install and disassemble.
4. Electronic UniveThere are rust, burrs, dents, scratches and other defects on the machined surface of the testing machine parts.
5. The surface of the castings used in the electronic universal testing machine has not been carefully cleaned of rust, molding sand, oil stains and other dirt, causing wrinkles, air bubbles and adhesions on the paint surface.
6. The paint adhesion on the surface of the universal electronic testing machine is not enough, and the oil resistance and corrosion resistance are poor. Easy to peel off.
7. The nameplate information of the universal electronic testing machine is unclear and incomplete, the nameplate position is not conspicuous, not firm, and the nameplate installation is crooked.
The details decide whether the manufacturer is involved. Heart. In the above places of the electronic universal testing machine, we can see what the manufacturing and service level of the manufacturer's instrument is.