Welcome to Qinsun Instruments Co., Limited.
2023-03-22 0 Views

Short constant temperature and humidity chamber repair, do you have it yet?

There are some problems after using the tool for a long time I will teach you some tips , and you can check it yourself in the future, but a friendly reminder: if you encounter a machine breakdown, you should contact the manufacturer in time. If we use a box with constant temperature and humidity, some parts or It will occur more or less Aging or other problems. If you are not in a hurry at this time, the best and fastest way is to contact the manufacturer and let the manufacturer solve it. Sometimes, when you encounter a special situation and you are in a hurry, you want to know the cause of the machine breakdown and the repairing method. Next, I will analyze the general cause and method of the breakdown for you. You can use it as a reference:

Error 1: The contactor controls the heater is damaged, maintenance method: replace contactor deviceepATextile Testing Instruments, Testing Equipment Manufacturer

Error 2: Expansion valve flow rate is too large or too small or damaged, maintenance method: adjust or replace expansion valve

Error 3: The thermal fuse of the heater in the constant temperature and humidity test chamber is blown, maintenance method: replace the thermal fuseepATextile Testing Instruments, Testing Equipment Manufacturer

Error 4: Insufficient amount of refrigerant in the cooling system (Fluorine leakage), maintenance method : check for leaks and charge with fluorineepATextile Testing Instruments, Testing Equipment Manufacturer

Error 5: Cooling system piping is blocked by debris or ice, Service Method: Replace the blocked unit or desiccant epATextile Testing Instruments, Testing Equipment Manufacturer

Error 6: The solenoid valve that supplies liquid to the vaporizer is damaged, maintenance method: replace the solenoid valveepATextile Testing Instruments, Testing Equipment Manufacturer

How to deal with the failure of the high and low temperature test chamber?
Specific requirements for installing salt spray test chambers