What are the cooling methods for high and low temperature test chambers?
The series of high and low temperature test chambers is mainly used for high and low temperature reliability testing of industrial products. For the parts and materials of related products, such as automobiles and motorcycles, electrics and electronics, aerospace, colleges, scientific research units, energy giants, etc., it is used to detect various performance indicators of the machine under high and low conditions or cyclic changes. The high and low temperature test chamber is used in a wide range of temperature control, and its performance indicators can reach the national standard. Then the high and low temperature test chamber has so many possible uses in real production! What kinds of cooling methods are used at the owndaily production of the high and low temperature test chamber series?
Detailed explanation of the cooling system of the high and low temperature test chamber
1. Cooling method: air-cooled;
2. Refrigerant: Use of refrigerant R502 (low pressure circuit);
3. Auxiliary parts of high cooling of low temperature test chamber : air-cooled coil condenser, multi-stage fin evaporator, main cooling accessories and control devices are imported originals.
4. The design of the cooling system should have energy regulation technology, an effective treatment method, can nicht only ensure the normal operation of the refrigeration unit, but also effectively adjust the energy consumption and cooling capacity of the refrigeration system, so that the operating costs and the failure rate of the refrigeration system can be reduced to a more economical level. Status;
5. Refrigeration Compressor: To set the cooling rate and the To ensure minimum temperature requirements of the test chamber, the connection tank is an evaporative condenser, and the function of the evaporative condenser is to use the low-pressure circuit evaporator as the high-pressure circuit condenser.