Precautions when using high and low temperature test chambers

High and Low Temperature Test Chamber Notes on when to use Elements:AT6Textile Testing Instruments, Testing Equipment Manufacturer

1. Before use, the first It is best to open the door of the cold and cold test cabinet for ventilation and at the same time wipe the inside of the cold and cold test cabinet again. It is best to clean the dust accumulated on the condenser to facilitate heat dissipation after working in the high and low temperature test chamber. When maintaining the system, be sure to unplug the power cord. When the power is off, it is best to stop the high and low temperature test chamber to avoid damage to the compressor and other components. AT6Textile Testing Instruments, Testing Equipment Manufacturer

2. afterh cleaning the high and low temperature test chamber , do not start using immediately, it is best to run the high and low temperature test chamber for a short time, stop for a period of time every two to three minutes, and repeat several times. If the high and low temperature test chamber is placed for a long time, the lubricating oil of some parts will be too thin. It may wear out quickly, which will shorten the life of the test chamber. AT6Textile Testing Instruments, Testing Equipment Manufacturer

3. Let the high and low temperature test chamber work. Multiple short running times allow the lubricating oil in the compressor to redistribute and penetrate the inside of the machine through intermittent time. Many high and low temperature test chambers have been set up in the laboratory for a while, and this method can also be used to maintain the high and low temperature test chambers when sie used for the first time to extend the life of the compressor from being reduced. AT6Textile Testing Instruments, Testing Equipment Manufacturer