The importance of maintaining the compressor in the high and low temperature test chamber

The compressor is the core component of the high and low temperature cycle test chamber The test plays a crucial role, so it is particularly important to maintain the compressor in the usual way.According to Dongguan Oke's many years of experience in the environmental testing equipment industry, the following compressor maintenance methods are summarized. NbFTextile Testing Instruments, Testing Equipment Manufacturer

1. Make sure the working environment is well ventilated and free from dust, keep the surface of the compressor clean. If the high and low temperature cycle test chamber is not used for a long time, the device should be placed in a dust-free place. NbFTextile Testing Instruments, Testing Equipment Manufacturer

2. It should be placed in a specific environment: Temperature: 5℃～30℃, Humidity: ≤ 85% RH, Atmospheric Pressure: 86～106kpa
3. EThere should be sufficient space for maintenance work around the equipment, nearby There is no source of electromagnetic radiation, the floor is level, well ventilated, and does not contain flammable, explosive or corrosive gases.
4. Finally, the last point is to explain that the compressor should not be started frequently during the test and the interval between compressor starts should be more than 15 minutes 2. The voltage at the workplace must be stable. If the voltage is unstable, it will If the current is too large or too small, long-term operation in this environment will severely damage the compressor It is recommended to use a voltage stabilizer to connect the power switch of the high and high voltage regulator low temperature cycle test chamber. NbFTextile Testing Instruments, Testing Equipment Manufacturer