Welcome to Qinsun Instruments Co., Limited.
2023-03-15 0 Views

What is the reason why the salt spray test chamber does not spray?

The salt spray test chamber is a test for hardware, metal and other auto parts that are subject to corrosion can quickly detect the degree of corrosion of the product under temperature and humidity, and effectively improve production efficiency;rDaTextile Testing Instruments, Testing Equipment Manufacturer


rDaTextile Testing Instruments, Testing Equipment Manufacturer

Why doesn't a salt spray test chamber spray? rDaTextile Testing Instruments, Testing Equipment Manufacturer

1. Perhaps the spray tower is blocked;

2. The water pipe is blocked and the water cannot flow in;rDaTextile Testing Instruments, Testing Equipment Manufacturer

3. The air compressor stops, turn on the air compressor button; rDaTextile Testing Instruments, Testing Equipment Manufacturer

4 . The air compressor output master switch is not turned on, Turn on the air compressor master switch;rDaTextile Testing Instruments, Testing Equipment Manufacturer

5. Electromagnetic Defective valve, defective pressure gauge or low pressure must be notified to the maintenance company for overhaul;rDaTextile Testing Instruments, Testing Equipment Manufacturer

6. When the nozzle is clogged, a small Carefully disassemble the nozzle to clean. rDaTextile Testing Instruments, Testing Equipment Manufacturer

7. When the spray pressure is normal, the nozzle glass The position is also correct, but what is the reason for not spraying? In this case, it is necessary to carefully observe whether there is dirt on the contact surface of the Dnozzle outlet is located. If so, clean the dirt and spraying can be done normally. rDaTextile Testing Instruments, Testing Equipment Manufacturer