Teach them to use a programmable constant temperature and humidity test chamber

QINSUNteaches you to use the constant temperature and humidity programmable test chamber quXTextile Testing Instruments, Testing Equipment Manufacturer

1. First connect the three-phase five-wire power supply, and pay attention to the safety of electricity when connecting; quXTextile Testing Instruments, Testing Equipment Manufacturer

2. Turn on the power indicator, the light is on for normal power on;
3. Open the box door and put it in the sample rack. The sample should be placed in 1/3 of the box volume, try not to exceed 2/3, so as not to block air duct circulation and affect temperature uniformity;
4. Turn on the controller, enter the setting interface, input the required temperature and humidity, and run time (it is advisable to add water to the water tank to 3/4);
5. After returning, just let it run;
6.You can click the graph to inquire the real-time curvegene and historical curve of temperature and humidity;
7. After the test is completed, pay attention to safety when taking out the sample; 8. After taking out the sample, you can do the fixed value test at 80 ℃, 30 minutes, dry the water vapor in the box, keep it dry;
9, It is recommended to wet ball gauze once a Week to replace, otherwise it may affect the test effect;
10, condenser clean the dust once every three months, just brush lightly with a soft brush;
11. The test samples should not be flammable, explosive or highly corrosive products. If you wish to perform similar tests, please contact the programmable constant temperature and humidity test chamber before contacting the manufacturer. quXTextile Testing Instruments, Testing Equipment Manufacturer