Welcome to Qinsun Instruments Co., Limited.
2023-03-10 0 Views

The secret recipe for maintaining the cryo-incubator

HH-600 Low-temperature constant temperature box uses electrostatic spraying process, the inner tank and top cover are made of high-quality stainless steel plate, which is resistant to corrosion, and the instrument temperature control has a pointer type and digital display type to choose from, used in medicine and health, scientific research, colleges and universities, laboratory units, and can be used for constant temperature evaporation, drying, concentration and heating of chemicals, inspection of serum, and constant temperature cultivation of biological products. 02wTextile Testing Instruments, Testing Equipment Manufacturer


02wTextile Testing Instruments, Testing Equipment Manufacturer

Cryogenic Incubator Maintenance Recipe:02wTextile Testing Instruments, Testing Equipment Manufacturer

1. When a heating sample is placed in the box, please use an external power supply to control the power supply of the sample, use it not directly Local power.02wTextile Testing Instruments, Testing Equipment Manufacturer

2. If you need to turn off the power after completing the low temperature operation, be sure to set the temperature condition to 60℃ and carry out the drying treatment for about half one hour so as not to affect the measurement time or the freezing phenomenon of the next operating state.02wTextile Testing Instruments, Testing Equipment Manufacturer

3. Before the moisture test, first check whether there is water in the Wwater tank is located and check whether the water level in the water storage tank is too high or too low. 02wTextile Testing Instruments, Testing Equipment Manufacturer

4. If the test If you want to observe the changes in the box, you can turn on the interior light switch and see the changes inside through the window.02wTextile Testing Instruments, Testing Equipment Manufacturer

5. It is absolutely forbidden to test explosives , flammable and highly corrosive substances. 02wTextile Testing Instruments, Testing Equipment Manufacturer

6. When the humidifier barrel enters the water pipe, the insertedclosed air should be fully released to prevent water ingress.02wTextile Testing Instruments, Testing Equipment Manufacturer

7. Freezer The cooler (condenser) should be regularly maintained and kept clean.02wTextile Testing Instruments, Testing Equipment Manufacturer